| FAB
|
Implementation
|
Synopsis
|
Last Modified Date
|
| A0253-1 |
C
|
A sub-population of DIMMs that shipped between 2001 and 2002 on the below platforms are showing significantly lower reliability than expected. |
Aug 18 2005
|
| A0223-1 |
U
|
On Sun systems, a small number of 256MB DIMMs may experience Uncorrectable Memory Errors (UE). |
Mar 23 2004
|
| A0215-1 |
U
|
Torque tools supplied with the Sun Fire 280R, Sun Enterprise 420R, and Sun Blades 1000 and 2000 systems may malfunction. |
Oct 10 2003
|
| A0186-1 |
U
|
SunPCi II and SunPCi IIpro cards may not respond after rapid/successive power cycling. |
Dec 03 2001
|
| I0888-1 |
R
|
Power management issue causes loss of access to internal fiber channel disks on the Sun Blade 1000/2000, Sun Fire V880, V480, and 280R. |
2002-11-26
|
| I0887-1 |
R
|
Guidelines for understanding and diagnosing UltraSPARC III Level 2 (L2) SRAM Cache Memory Errors. |
2002-10-07
|
| I0883-1 |
R
|
New LC1 DIMMs are available for Sun Blade 1000/2000 and Sun Fire 280R platforms |
2002-09-24
|
| I0874-1 |
R
|
UltraSPARC III systems may panic due to a conflict between the Schizo 2.4 ASIC and the GigaSwift Ethernet PCI Card |
2002-09-11
|
| I0832-1 |
R
|
CPU shroud inserts were installed incorrectly in Sun Blade 1000, Sun Blade 2000, Netra 20 and Sun Fire 280R systems, causing increased resistance during insertion/removal of CPU modules |
2002-06-06
|
| I0743-1 |
R
|
Rack-mounted Enterprise 220R, 420R and Sun Fire 280R systems may bind with adjacent systems if improperly installed |
2002-01-16
|
| I0689-1 |
R
|
To torque correctly on a specific Sun Products, refer to the Torque tool matrix for correct Torque Bit Type/Size and Torque Setting |
2002-09-26
|
