Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Sun StorEdge L3500 : Archived FINs and FCOs

Implementation (Impl.):
M = Mandatory (Fully Pro-Active)

C = Controlled Pro-Active (per Sun Geo Plan)

U = Upon Failure
R = Reactive (As Required)

FAB Implementation Synopsis Last Modified Date
A0150-1 C DLT7000 tape drives may fail with right column of LED's flashing. Aug 31 1999
I0547-1 C Intermittently, SCSI devices connected to a UDWIS card may 2000-01-21
I0519-1 n/a Networker may attempt to position a DLT7000 volume to read the label before the drive has completed the load sequence 1999-09-16
I0495-1 R DLT7000 door handle shaft may sustain damage if not in closed position before shipping. 1999-06-18
I0448-1 C DLT 7000 drive Take-Up Leader and Cartridge Leader misalignment may cause the unit to fail. 2004-01-07
I0435-1 R DLT7000s may exhibit poor performance due to an incorrect st.conf file entry. 1998-11-05
I0407-1 R The Care and Inspection of DLT Cartridge Tapes. 1998-08-08
I0380-2 n/a UPDATED FIN. LibMON 1.0 is not compatible with Solaris 2.6 2004-01-07
I0360-1 n/a The ATL 4/1800 and ATL 7/3500 have temperature sensors that are programmed by the vendor. Some units have been shipped with sensors that were not programmed. 1997-11-15
I0349-1 n/a The two tape drive versions of the ETL 7/3500 and ETL 4/1800 are missing cables, which are needed to install additional drives. 1997-09-27
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback