Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



CPU/Memory Uniboard

Sun Fire 3800 / 4800 / 4810 / 6800 / 12K / 15K
Sun Fire E4900 / E6900 / E20K / E25K

501-6178 501-7539
0MB w/o USIII
w/o Cache
0MB w/o USIII
w/o Cache
April 2006
L
501-6150 501-6112
0MB 501-6178
4 × 4MB Ecache
w/o USIII
0MB 501-6178
8 × 4MB Ecache
w/o USIII

540-5051 2 × 900MHz USIII Cu
0MB FRU
August 2001 Tyco Socket Cheetah+ 2.1/2.2/2.3
540-5821 2 × 900MHz USIII Cu
0MB FRU
February 2003 <= -04 Tyco Socket
-05 Cinch Socket
Cheetah+ 2.3 PEEK
540-6078 2 × 900MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah+ 2.1/2.2/2.3
or 2.3 PEEK
559-0072 * 2 × 900MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6078
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)
540-5052 4 × 900MHz USIII Cu
0MB FRU
August 2001 Tyco Socket Cheetah+ 2.1/2.2/2.3
540-5825 4 × 900MHz USIII Cu
0MB FRU
February 2003 <= -04 Tyco Socket
-05 Cinch Socket
Cheetah+ 2.3 PEEK
540-6079 4 × 900MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah+ 2.1/2.2/2.3
or 2.3 PEEK
559-0067 * 4 × 900MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6079
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)

540-5623 2 × 1050MHz USIII Cu
0MB FRU
August 2001 Tyco Socket Cheetah+ 2.3
540-5795 2 × 1050MHz USIII Cu
0MB FRU
February 2003 <= -04 Tyco Socket
-05 Cinch Socket
Cheetah+ 2.3 PEEK
540-6080 2 × 1050MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah+ 2.3
or 2.3 PEEK
559-0073 * 2 × 1050MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6080
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)
540-5267 4 × 1050MHz USIII Cu
0MB FRU
August 2001 Tyco Socket Cheetah+ 2.3
540-5799 4 × 1050MHz USIII Cu
0MB FRU
February 2003 <= -04 Tyco Socket
-05 Cinch Socket
Cheetah+ 2.3 PEEK
540-6081 4 × 1050MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah+ 2.3
or 2.3 PEEK
559-0068 * 4 × 1050MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6081
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)

540-5691 2 × 1200MHz USIII Cu
0MB FRU
January 2003 <= -03 Tyco Socket
-04 Cinch Socket
Cheetah++
540-6082 2 × 1200MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah++
559-0074 * 2 × 1200MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6082
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)
540-6848 2 × 1200MHz USIII Cu
0MB FRU
L
April 2006 Cinch Socket Cheetah++
540-5605 4 × 1200MHz USIII Cu
0MB FRU
January 2003 <= -03 Tyco Socket
-04 Cinch Socket
Cheetah++
540-6083 4 × 1200MHz USIII Cu
0MB FRU
December 2003 Cinch Socket Cheetah++
559-0069 * 4 × 1200MHz USIII Cu
0MB FRU

Cinch Socket Relabeled 540-6083
with L2 Cache rework
(used to support FCO A0248)
(DPCO 481)
540-6849 4 × 1200MHz USIII Cu
0MB FRU
L
April 2006 Cinch Socket Cheetah++
* The 559 class code is used to separate new (540) and used (559) parts in Operations.
UniBoards labeled 559 are repaired and relabeled with a 540 class code upon failure.

CPU1 and CPU0 Memory

SOCKET CPU BANK DIMM
J14600
J14601
J14500
J14501
J14400
J14401
J14300
J14301
P1
P1
P1
P1
P1
P1
P1
P1
B0
B1
B0
B1
B0
B1
B0
B1
D3
D3
D2
D2
D1
D1
D0
D0
J13600
J13601
J13500
J13501
J13400
J13401
J13300
J13301
P0
P0
P0
P0
P0
P0
P0
P0
B0
B1
B0
B1
B0
B1
B0
B1
D3
D3
D2
D2
D1
D1
D0
D0
   

CPU3 and CPU2 Memory

SOCKET CPU BANK DIMM
J16600
J16601
J16500
J16501
J16400
J16401
J16300
J16301
P3
P3
P3
P3
P3
P3
P3
P3
B0
B1
B0
B1
B0
B1
B0
B1
D3
D3
D2
D2
D1
D1
D0
D0
J15600
J15601
J15500
J15501
J15400
J15401
J15300
J15301
P2
P2
P2
P2
P2
P2
P2
P2
B0
B1
B0
B1
B0
B1
B0
B1
D3
D3
D2
D2
D1
D1
D0
D0

 

 

System Codenames

System Codename
Sun Fire 3800-6800 Serengeti
Sun Fire 15K Starcat
Sun Fire 12K Starkitty

Notes

  1. Four DIMMs of the same size form a bank.
  2. A populated DIMM bank requires an UltraSPARC III CPU.
  3. Mixing UltraSPARC III and UltraSPARC III Cu is not supported.
  4. The USIII socket changed from Tyco to Cinch in October 2003.
  5. Alternate sockets from Foxcon and Teledyne were added in December 2003.
  6. Part numbers 540-5051 and 540-5821 changed to 540-6078 in December 2003.
  7. Part numbers 540-5052 and 540-5825 changed to 540-6079 in December 2003.
  8. Part numbers 540-5623 and 540-5795 changed to 540-6080 in December 2003.
  9. Part numbers 540-5267 and 540-5799 changed to 540-6081 in December 2003.
  10. Part number 540-5691 changed to 540-6082 in December 2003.
  11. Part number 540-5605 changed to 540-6083 in December 2003.
  12. 900MHz UniBoards 540-4934 and 540-4992 were reworked to 1200MHz UniBoard 559-0069. (GSAP 3101)
  13. Refer to the Install.info file of any Firmware patch for information on firmware verification and compatibility.
  14. All system board FRUs in the RSLs are non-COD. When replacing a COD system board, COD must be enabled, see FIN I-0912 for details.

SF3800 - SF6800 Notes

  1. The minimum operating system is Solaris 8 10/01 for 900Mhz, 1050MHz, and 1.2GHz CPUs.
  2. The minimum hot swap upgrade OS is Solaris 8 02/02 for all supported CPU speeds.
  3. The minimum firmware level for 900MHz and 1050MHz UltraSPARC III Cu is given as 5.12.5 in 816-3798-10 (November 2001), and 5.12.7 in 816-3798-11 (August 2002) and 816-3798-12 (February 2003).
    But a minimum firmware level of 5.13.5 or 5.14.4 is recommended in 816-3798-13 (April 2003).
  4. The minimum firmware level for 1200MHz UltraSPARC III Cu is given as 5.13.2 in 816-3798-12 (February 2003).
    But a minimum firmware level of 5.13.5 or 5.14.4 is recommended in 816-3798-13 (April 2003).
  5. The minimum firmware for UltraSPARC III Cu 1.1 is 5.13.5 or 5.14.4.
  6. Capacity On Demand Uniboards require >= 5.14.0.
  7. The minimum firmware level for 900MHz UltraSPARC III Cu 2.3 is 5.12.7.
    (UltraSPARC III Cu 2.3 is on FRUs 540-5821-01 and 540-5825-01).
  8. CPU/Memory Board slots are labeled SB0 through SB5.
  9. Install Filler Board 540-4040 in all empty CPU/Memory Board slots.
  10. Install Filler Panel 330-2821 when servicing a CPU/Memory Board slot.
  11. Mixing CPU speeds of 900MHz, 1050MHz and 1200MHz within a domain or system/platform is supported.
    750MHz CPUs cannot be included in mixed-speed configurations.
  12. 1GB DIMMs 501-6109 and 540-5086 are only supported on 900MHz and faster system boards.
  13. How To article 1005873.1 provides a "ftp-only" shortcut for updating the flashprom firmware.

Sun Fire 12K / 15K Notes

  1. The minimum operating system for 900MHz CPU modules is Solaris 8 10/01.
  2. The minimum operating system for 1050MHz CPU modules is Solaris 8 2/02 with appropriate patches.
  3. The minimum operating system for 1200MHz CPU modules is Solaris 8 2/02.
  4. The minimum hot swap upgrade OS is Solaris 8 02/02 for all supported CPU speeds.
  5. Mixing CPU speeds within a domain or system/platform is supported.
  6. SMS 1.2 patches >=112481-06 and >=112488-07 are required for the 1050MHz or 1200MHz Uniboard.
  7. Capacity On Demand on the 1200MHz Uniboard requires SMS 1.3.
  8. CPU/Memory Board slots are labeled SB0 through SB17.

References

  1. Sun Fire Systems Service Manual, 805-7363.
  2. Sun Fire High-End and Midrange Systems Memory Module (DIMM) Installation Guide, 806-3281.
  3. Sun Fire Systems Platform Administration Manual, 805-7373.
  4. Sun Fire 15K Service Manual, 806-3512.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback