Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback



Netra 440

N42

501-6344 501-6910 540-5919-04/05 540-5919-06
Motherboard
270-6344-05/06/07
June 2003
Motherboard
270-6344-07
September 2004
Motherboard FRU
501-6344
March 2004
Motherboard FRU
501-6910
September 2004
501-7343 540-6710
Motherboard
270-6344-07
May 2006
L
Motherboard FRU
501-7343
May 2006
L

LOCATION PINS SETTING DESCRIPTION
J4202 1-2
2-3
In
In
Normal Real Time Clock (default)
Clear Real Time Clock CMOS
J4204 1-3 Out 1-2=XIR 2-3=POR (default)
J4205 1-3
2-3
Out
In
Flash Write Protected *
Flash Write Enabled (default) *
J4206 1-2
2-3
In
In
Select ROMBO
Select Flash (default)
J4207 2-3
1-2
In
In
Normal Flash (default)
Flash Recovery
* Jumpering 1-2 has no effect because Pin-1 not connected.

The Flash PROM is write protected when:
J4205 Pins 2-3 are Not jumpered
or the Keyswitch is in the Locked position

The Flash PROM is write enabled when:
J4205 Pins 2-3 are jumpered
and the Keyswitch is in the Normal or Diagnostic position
and the PROM_SB_WE_N signal is software enabled

Netra 440 Codename: Chalupa 19

Notes

  1. The minimum operating system is Solaris 8 7/03 or Solaris 9 12/03.
  2. Motherboard 501-6910 replaced 501-6344 in September 2004. (WO_29866)
  3. Motherboard 501-6910 requires ALOM >=1.5. See FCO A0245-1.
  4. See FAB article 1000080.1 for information on possible need for ALOM >=1.6.2.

Memory Notes

  1. Bank, Rank, DIMM, and XOR Interleaving is supported.
  2. UltraSPARC IIIi supports single bank and dual bank DDR DIMMs.
  3. Two DIMMs of the same bank size (single or dual) and memory size form a bank.
  4. The minimum requirement is two DIMMs in any Bank (B0/D0/D1 or B1/D0/D1).
  5. Memory error reporting identifies a failing Bank, not a single failing DIMM.

Motherboard Notes

  1. The pre-RoHS Motherboard FRU includes Tray 340-7996, Motherboard 501-6344, Rear LED Extension Cable 530-3309, and CPU/Memory Shroud 540-5285.
  2. The RoHS Motherboard FRU includes Tray 340-7996, Motherboard 501-7343, Rear LED Extension Cable 530-3309, and CPU/Memory Shroud 541-1436.
  3. The CPU/Memory Shroud holds Tomatillo heatsinks at U1501 and U2601 in place.
  4. Master Tomatillo interfaces include the ALOM Slot, Ethernet 1, Flash PROM, I2C, ATA-100, PCI Slots 0, 1, and 3, SCSI, Serial B, Serial PROM, Smart Card Reader, TOD, and USB 0-3.
  5. Slave Tomatillo interfaces include Ethernet 0, and PCI Slots 2, 4, and 5.

References

  1. Netra 440 Server Product Overview, 817-3881.
  2. Netra 440 Server Installation Guide, 817-3882.
  3. Netra 440 Server Service Manual, 817-3883.
  4. Netra 440 Server System Administration Guide, 817-3884.
  5. Netra 440 Server Release Notes, 817-3885.
  6. Netra 440 Server Diagnostics and Troubleshooting Guide, 817-3886.

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback