| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
| Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | ||
|
|
||
 |
||||||||||||
Solution Type Technical Instruction Sure Solution 1019321.1 : How to check Fault/warning LEDs on Blade 6000/6048 Systems
PreviouslyPublishedAs 238485 Description This document describes how to check LED states on a Blade 6000 and a Blade 6048 chassis. Symptoms
Purpose/Scope This document gives details on how to check LED states on a SunBlade [TM] 6000 system and a SunBlade [TM] 6048 system, on both the chassis and the individual blades The document will describe how to check locally (i.e. if you have physical
access to the platform), and remotely using ipmitool commands Steps to Follow Steps to follow to check chassis LED status Blade 6000 LEDs The CMM has the following LEDs:
A full description on the state of each LED may be found in the Sun System handbook, at Sun Blade 6000 Modular System LEDs If you note that the Service Action Required LED is lit on CMM, check the indicators on the power supplies and fan modules to see if one of these is also lit. If the chassis Service Action Required LEDs are illuminated but no other system component displays its Service Action Required LED, then fault management has diagnosed an external fault: a problem outside the system that potentially affects the system as a whole. For example, if the external ambient air temperature exceeds 45 C, a fault is declared and the system will shut down although there is nothing physically wrong with any system hardware. If the chassis Temperature Fail LED is on, then at least one of the ambient temperature sensors in the power supply modules surpassed 40 C. If an individual blade server “Service Action Required” LED is lit, refer to the following: Sun Blade T6300 Server Module LEDs The Ethernet Link Activity on the CMM, provides these indications:
Steady On - indicates
external Ethernet connection is active. Blade 6048 LEDs Refer to Sun Blade 6048 Modular System LEDs Interrogating LEDs remotely using ipmitool You can access LED information remotely on systems that run the ILOM (i.e the chassis CMM and the X6220 blade server) as follows: #
ipmitool
-I lan -H <CMM_ip_addr> -U root sunoem led get all # ipmitool -I lan -H <X6220_sp_ip_addr> -U root sunoem led get all Password:
NOTE: You can't access blade servers running ALOM using ipmitool. You can access blade servers running ELOM (i.e X6250) and gather sensor data: # ipmitool -I lan -H 10.18.16.7 -U root sdr Password:
Product Sun Blade 6000 Modular System Sun Blade 6048 Modular System Sun Blade X6220 Server Module Sun Blade X6250 Server Module Sun Blade X6450 Server Module Sun Blade T6300 Server Module Sun Blade T6320 Server Module Internal Comments This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the “Document Feedback” alias(es) listed below: Domain Lead: [email protected] Feedback Alias: blade_normalizers@sun normalized, 6000, blade, 6048, no power, X6220, X6250, T6300, T6320, no led's, no AC, can't login, fault light Attachments This solution has no attachment |
||||||||||||
|
||||||||||||