| Processor | 
    
      | Number | 
        2 or 4, Dual-Core 7200 series2 or 4, Quad-Core 7300 series1, 2, 3 or 4, Quad-Core or 6-Core 7400 series | 
    
      | Architecture | Type: Intel Xenon 
 
	Dual-Core Intel Xeon E7220 (2x4MB L2, 2.93 GHz, 1066 MHz FSB, 80W)Quad-Core Intel Xeon L7345 (2x4MB L2, 1.86 GHz, 1066 MHz FSB, 50W)Quad-Core Intel Xeon E7320 (2x2MB L2, 2.13 GHz, 1066 MHz FSB, 80W)Quad-Core Intel Xeon E7340 (2x4MB L2, 2.40 GHz, 1066 MHz FSB, 80W)Quad-Core Intel Xeon X7350 (2x4MB L2, 2.93 GHz, 1066 MHz FSB, 130w)Quad-Core Intel Xeon E7420 (8MB L3, 2.13 GHz, 1066 MHz FSB, 90w)Quad-Core Intel Xeon E7440 (16MB L3, 2.40 GHz, 1066 MHz FSB, 90w)6-Core Intel Xeon L7455 (12MB L3, 2.13 GHz, 1066 MHz FSB, 65w)6-Core Intel Xeon E7450 (12MB L3, 2.40 GHz, 1066 MHz FSB, 90w)6-Core Intel Xeon X7460 (16MB L3, 2.66 GHz, 1066 MHz FSB, 130w) | 
    
      | Cache memory | 4MB to 8MB L2 cache for Intel Xeon processor 7200 and 7300 series 8MB to 16MB L3 cache for Intel Xeon processor 7400 series
 | 
    
      | Main Memory | 
    
      | Capacities | DIMM slots per System: 32 DIMM type: PC2-5300 667MHz ECC Fully Buffered DDR2 DIMMs
 DIMM size: 1-GB, 2-GB or 4-GB
 Maximum capacity: 128GB (when configured with 4-GB DIMMs)
 NOTE: For optimal performance,
install DIMMs in matched pairs. DIMM fillers should be installed in all unoccupied DIMM slots.
 
 | 
    
      | Standard
Integrated Interfaces | 
    
      | Network | Four 10/100/1000 Base-T Ethernet Ports 
 | 
    
      | Network Management | One dedicated 10/100Base-T Ethernet port | 
    
      | Serial Management | One dedicated TIA/EIA-232-F asynchronous RJ45 port | 
    
      | SAS | Eight channel SAS interface, internal or external with add-on SAS Host Bus Adapter | 
    
      | USB | Front: Two USB 2.0 ports Rear: Two USB 2.0 ports
 Internal: One USB 2.0 port
 | 
    
      | PCI Expansion Slots | Six internal MD2 low profile PCI Express slots (two x8 electrical/x16 mechanical, one x4 electrical/x16 mechanical and three x4 electrical/x8 mechanical)
 | 
    
      | Internal Mass Storage | 
    
      | Disks | Up to eight 2.5" SAS internal hot-swap Disks 
 
 
| Drive Type 
 | Density 
 | Speed 
 | Form Factor 
 |  
| SAS 
 | 73 GB 
 | 10,000 RPM 
 | 2.5" 
 |  
| SAS 
 | 73 GB 
 | 15,000 RPM 
 | 2.5" 
 |  
| SAS 
 | 146 GB 
 | 10,000 RPM 
 | 2.5" 
 |  
| SAS 
 | 300 GB 
 | 10,000 RPM 
 | 2.5" 
 |  
 | 
    | Solid State Drives | Up to six 32GB solid state drives | 
    
      | Removable Media | One EIDE DVD+/-RW drive (optional) | 
    
      | Power Supplies | 
    
      | Dual redundant, hot swappable power supplies (Power supply rating DC output = 1050W)
 (UL Maximum AC input = 12 Amps RMS at 100 VAC)
 
 | 
    
      | Environment | 
    
      | AC power | 90-264 V AC (47-63 Hz) | 
    
      | Temperature | For Intel Xeon processor 7200 and 7300 series: Single, non-rack system:
 Operating: 5° C to 35° C (41° F to 95° F) with 50/80W CPU, 
       5° C to 31° C (41° F to 88° F) with 130W CPU
 Nonoperating: -40° C to 65° C (-40° F to 149° F)
 
 For Intel Xeon processor 7400 series:
 Single, non-rack system:
 Operating: 5° C to 35° C (41° F to 95° F) at sea level, 
       5° C to 31° C (41° F to 88° F) at altitude
 Nonoperating: -40° C to 65° C (-40° F to 149° F)
 
 | 
    
      | Humidity | Single, non-rack system: Operating: 7% to 90% relative humidity noncondensing,
27° C (80.6° F) max wet bulb
 Nonoperating: up to 93% relative humidity noncondensing,
38° C (100.4° F) max wet bulb
 | 
    
      | Altitude | Single, non-rack system: Operating: up to 3048 m (10,000 ft.), maximum ambient
temperature is derated by 1° C per 300 m above 900 m
 Nonoperating: up to 12,000 m (40,000 ft.)
 | 
    
      | Acoustic noise | For Intel Xeon processor 7200 and 7300 series: Single, non-rack system:
 LwAd (1B=10dB)
 6.8 B (idle) and 7.3 B (operating) for 1GB and 2GB DIMMs
 7.3 B (idle and operating) for 4GB DIMMs
 LpAm bystander
 65.8 dB at max ambient
 
 For Intel Xeon processor 7400 series:
 Single, non-rack system:
 LwAd (1B=10dB)
 7.3 B (idle and operating. room temp.), 7.7 B (max ambient)
 LpAm bystander
 65.8 dB at max ambient
 
 
 | 
    
      | Regulations Meets or exceeds the following
requirements:
 | 
    
      | RoHS Compliance Level | RoHS:YL | 
    
      | Safety | IEC 60950, UL/CSA 60950-1, EN 60950, CB Scheme with all country
differences | 
    
      | RFI/EMI | FCC CFR 47 Part 15 Class A, EN 55022 Class A, EN 61000-3-2,
          EN 61000-3-3, EN300-386 | 
    
      | Immunity | EN55024, EN300-386 | 
    
      | Certifications | Safety: UL/cUL, UL DEMKO, CE, BSMI, CCC, GOST-R, S-Mark EMC: CE, FCC, VCCI, ICES, C-Tick, MIC, CCC, Gost-R, BSMI Class A
 | 
    
      | Dimensions and Weight | 
    
      | Height | 88 mm (3.49 in.) | 
    
      | Width | 426 mm (16.75 in.) | 
    
      | Depth | 714 mm (28.125 in.) | 
    
      | Weight | 25.6 kg (56.3 lb.) maximum with rack kit 
 | 
    
      | Rack Mounting | 
    
      | Optional Slide Rail Kit (X6324A)1is a
4-point mounted slide rail kit. | 
    
      | Sun Fire X4450 server racks (using either the X6325A or X6326A rackmount kits) | Racks are as follows: 
        Sun Rack 938Sun Rack 1038Sun Rack 1042Third Party EIA-310-D-19922 | 
    
      | 1 The slide kit includes hardware that
enables mounting to any of the following types of rack rails: 
        2 These must be compliant racks which have mounting
depths of 27-30 inches.6 mm threaded holes#10-32 threaded holes#10 threaded holes Square unthereaded holes per EIA and IEC standards
 |