|
Processor |
| Number |
1 or 2 (Single or Dual-Core) |
| Architecture |
Type: AMD Opteron Processor 200 Series
Single Core: 248 (2.2GHz), 252 (2.6GHz), 254 (2.8GHz), or 256 (3.0GHz)
Dual Core: 275 (2.2GHz), 280 (2.4GHz), or 285 (2.6GHz) |
| Cache memory |
1 MB Level 2 cache per processor core |
|
Main Memory |
| Capacities |
DIMM slots per processor: 4
DIMM slots per System Board: 8 (using 2 processors)
DIMM type: DDR1/400 ECC registered DIMMs (128 bit plus ECC databus)
DIMM size: 512-MB, 1-GB, or 2-GB
Maximum capacity: 16GB (when configured with 2-GB DIMMs and 2 processors)
|
|
Standard Integrated Interfaces |
| Network |
Four 10/100/1000Base-T Ethernet ports |
| Network Management |
One dedicated 10/100Base-T Ethernet port |
| Serial Management |
One dedicated TIA/EIA-232-F asynchronous RJ45 port |
| SAS |
Four channel SAS interface, internal access only. |
| USB |
Front: Two USB 1.1 port
Rear: Two USB 1.1 ports |
| Expansion bus |
Five internal MD2 Low Profile 64-bit PCI-X slots
- one at 64-bit/100MHz (slot 0)
- one at 64-bit/133MHz (slot 1)
- three at 64-bit/66MHz (slots 2-4)
|
|
Internal Mass Storage |
| Disks |
Up to four hot-swap Disks (36GB, 73GB or 146GB 10K RPM SAS HDD) |
| DVD-ROM |
One EIDE ATAPI Slot Loading DVD-ROM (optional) |
|
Power Supplies |
Dual redundant, hot swappable power supplies
(Maximum DC output = 550W)
(Maximum AC input = 550W x 1.33 efficiency = 733W) |
|
Environment |
| AC power |
90-264 V AC (47-63 Hz) |
| Temperature |
Single, non-rack system:
Operating: 5° C to 35° C (41° F to 95° F)
Nonoperating: -40° C to 65° C (-40° F to 149° F) |
| Humidity |
Single, non-rack system:
Operating: 10% to 90% relative humidity noncondensing,
27° C (80.6° F) max wet bulb
Nonoperating: up to 93% relative humidity noncondensing,
38° C (100.4° F) max wet bulb |
| Altitude |
Single, non-rack system:
Operating: up to 3000 m (10,000 ft.), maximum ambient temperature
is derated by 1° C per 500 m above 500 m
Nonoperating: up to 12,000 m (40,000 ft.)
|
| Acoustic noise |
Single, non-rack system:
Less than 83 dB sound power in ambient temperature of up to 24° C |
| Vibration |
Single, non-rack system:
.20 G, 5 to 500 Hz sine sweep |
| Shock |
Single, non-rack system:
5 G, 11 ms half-sine |
Regulations
Meets or exceeds the following requirements: |
| RoHS Compliance Level |
RoHS:YL |
| Safety |
IEC60950, UL/CSA60950, EN60950, (CB Scheme with all country differences) |
| RFI/EMI |
FCC Class A, Part 15 47 CFR, EN55022, CISPR 22, EN300-386:v1.31, ICES-003 |
| Immunity |
EN55024, EN300-386:v1.31 |
| Certifications |
Safety: cULus Mark, TUV GS Mark, CE Mark, CCC, GOST R, S-Mark
EMC: CE Mark (93/68/EEC), Emissions and Immunity Class A Emissions Levels:
FCC, VCCI, BSMI, C-Tick, MIC, CCC, GOST |
|
Dimensions and Weight |
| Height |
87.6 mm (3.45 in.) |
| Width |
445 mm (17.5 in.) |
| Depth |
640 mm (25.2 in.) |
| Weight |
23.7 kg (52.1 lb.) maximum with rack kit
16.0 kg (35.0 lb.) maximum without rack kit |
|
Rack Mounting |
| Optional Slide Rail Kit (X8029A)1 is a 4-point mounted slide rail kit. |
| Sun Fire X4100 and X4200 Server Racks (using the X8029A kit) |
Racks are as follows:
- Sun Rack 900
- Sun Rack 1000-38
- Sun Rack 1000-42
- Third Party EIA-310-D2
|
1 The slide kit includes hardware that enables mounting to any of the following
types of rack rails:
- 6 mm threaded holes
- #10-32 threaded holes
- #10 threaded holes
2 These must be compliant racks which have mounting depths of 27-30 inches.
|
