Sun Fire[tm] E25K
: Archived FINs and FCOs
M = Mandatory (Fully Pro-Active)
C = Controlled Pro-Active (per Sun Geo Plan)
U = Upon Failure
R = Reactive (As Required)
|| Last Modified Date
||The Vcore setting for UltraSPARC IV 1350MHz boards should be 1.25V, but some earlier releases of firmware will power on and operate the board at an incorrect voltage.
||System Controllers using CP2140 (Othello+) boards with Firmware level 1.1.6 or lower may have a booting issue after a power cycle.