|
Processor |
| Number |
1
|
| Architecture |
1.0/1.2-GHz UltraSPARC T1 Chip Multithreaded (CMT)
1.2 GHz is 8 core
1.0 GHz are 4 or 6-core
CoolThreads Server
ECO-Responsible Server |
Cache memory |
3 MB unified level 2 cache with ECC |
|
Main Memory |
| Capacities |
DIMM slots per memory controller: 4
DIMM type: DDR2 ECC registered DIMMs
DIMM size: 512-MB, 1-GB, 2-GB, or 4-GB
Maximum capacity: 64GB (when configured with 4-GB DIMMs)
Note: DIMMS must be installed in sets of 8 (with one pair on each controller). Two basic memory configurations are supported: 2-DIMMs or 4-DIMMs per controller,
with a maximum memory configuration of 16 DIMMs. All DIMMs must have identical capacity.
|
|
Standard Integrated Interfaces |
| Network |
Four 10/100/1000 Base-T Ethernet autonegotiating ports
|
| Network Management |
One dedicated 10/100Base-T Ethernet port |
| Remote Management |
SC Serial Management port and Net Management port |
| USB |
Rear:Two USB 1.1 ports |
| PCI Interfaces |
One PCI-Express (PCI-E) low-profile X8 (slot 0)
Three PCI-X full-height 64-bit, 133 MHz card slots. (slots 0 , 1, 2), 2x full length, 1x half height
|
|
Internal Storage |
| Disks |
SFF 2.5-inch form factor, SAS, 10K RPM, 73GB or 146GB, hot-pluggable drives.
Two disk drive chassis supports up to two drives with support for RAID (0+1).
Four disk drive chassis supports two, three or four disk RAID 0. |
| Removable Media |
1 (optional) slimline DVD-R/CD-RW drive |
Power Supplies
|
Two hot-swappable, high efficiency 550W (1+1 redundant) power supplies.
|
| Operating input voltage range |
AC specification:100 to 240 VAC, 50-60 Hz
DC specification: -48VDC or -60VDC (nominal) |
| Maximum operating input current |
AC specification:5.4 A at 100 to 120 VAC or 2.6 A at 200 to 240 VAC
DC specification: 10.4A at -48VDC or 8.3A at -60VDC |
| Maximum heat dissipation |
AC:1,840 BTU/hr
DC:1,710 BTU/hr |
| Nominal Power |
300 W |
Space, Watts and Performance (SWaP) |
| Space (RU) |
2 |
| Watts |
300 |
| Performance (application tier benchmark) |
5300 |
| Performance/watt |
17.667 |
| SWaP |
8.8 |
Environment |
| Temperature |
Operating: 5° C to 40° C (41° F to 104° F)
Non-operating: -40° C to 70° C (-40° F to 158° F)
|
| Humidity |
Operating: 5% to 85% relative humidity, noncondensing, 27° C (80.6° F) wet bulb
Non-operating: up to 93% relative humidity, noncondensing 38° C (100.4 ° F) wet bulb |
| Altitude |
Operating: up to 3000 m (9,850 ft.) @40° C
Non-operating: up to 12,000 m (40,000 ft.) |
| Acoustic noise - LwAd (1 B = 10 dB) |
Operating: 7.0 B
Idling: 7.0 B |
| Vibration (verify) |
Operating: 0.2 Gs, Swept sine 5-500-5Hz, 1 octave/min, all axes, IEC 60068-2-13
Non-operating: 1.0 Gs, Swept sine 5-500-5Hz, 1 octave/min, all axes, IEC 60068-2-13 |
| Shock(verify) |
Operating: 5.0 Gs peak 11 msec, half-sine pulse, IEC 60068-2-27
Non-operating: 30.0 Gs peak 11 msec, half-sine pulse, IEC 60068-2-27 |
| Cooling |
3 hot-swappable and redundant system fans.
1 hot-swappable blower unit.
|
Regulations
Meets or exceeds the following requirements: |
| RoHS Compliance Level |
RoHS:YL |
| Safety |
UL/CSA-60950-1, EN60950-1, IEC60950-1 CB Scheme with all country deviations, IEC 825-1,2, CFR21 part 1040, CNS 14336, GB4943 |
| Ergonomics |
EK1-1TB-2000 |
| RFI/EMI |
EN55022 Class A, 47
CFR 15B Class A, ICES-003 Class A, VCCI Class A, AS/NC 3548 Class A, CNS 13438 Class A, KSC 5858 Class A, GB9254 Class A, EN61000-3-2, GB17625.1, EN61000-3-3 |
| Immunity |
EN55024, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-1111 |
| Telecommunications |
EN300-386, DC only: Telcordia SR 3580 NEBs Level 3 |
| Regulatory Markings (pending) |
CE, FCC, ICES-003, C-tick, VCCI, GOST-R, BSMI, MIC, UL/cUL, UL/DEMKO/GS, UL/S-mark, CCC |
| Seismic |
GR-63-CORE requirements for earthquake zone 4 |
| ETSI |
EN 300 019-2-1,2,3 Class 1.2, 2.3, 3.1E |
Dimensions and Weight |
| Height (2 rack units) |
89 mm (3.5 in.) |
| Width |
424 mm (16.7 in.) |
| Depth |
508 mm (20 in max.)
483 mm (19 in. to connector plane) |
| Weight, approximate (without PCI cards and rack mounts) |
16 kg (35 lb.) |
|
Clearance and Service Access |
| Front |
91 cm (36 in.) |
| Rear |
91 cm (36 in.) |
|
Rack Mounting |
| SR900-38 |
Sun Rack 900 - 38 (alloy) |
| SR900-36N |
Sun Rack 900 - 36N (alloy) |
| SR1000-38 |
Sun Rack 1000 - 38 (alloy) |
| SR1000-42 |
Sun Rack 1000 - 42 (alloy) |
| SG-XARY030A |
Sun StorEdge 72-inch expansion cabinet |
|
Sun Fire cabinet |
