Sun Microsystems, Inc.   Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Netra[tm] T1 AC200 / DC200 Servers: Hardware Specifications


Standard telco racks: 19 in. (standard), 23", 24", and 600mm (optional)

Number One
Architecture Architecture UltraSPARC IIe V9 Superscalar Processor Platform Version 9:
64-bit single processor, 500 MHz Integrated memory controller PC 100/133
Cache memory 16 KB data and 16 KB instruction on-chip Secondary: 256 on-chip
Main Memory

256- and 512-MB PC133 standard Registered DIMMs

2 GB maximum

Standard Interfaces
Ethernet Two ethernet/fast ethernet (10BASE-T/100BASE-T) shielded twisted-pair (STP) connector (RJ-45)

Single full length PCI slot compliant with PCI specification version 2.1; slot operates at 33-MHz, 32-bits

SCSI One 80-MB/sec, 68-pin, Ultra2 SCSI (SE/LVD) port
Serial Two RS-232C/RS-423 serial ports (RJ45); port A is used as a console and LOM port
System Configuration Reader and Card

Front-accessible for transfer of system configuration information, including hostid

USB Two OHCI-compliant Universal Serial Bus (USB) Type A ports
Internal Mass Storage
Disks Up to two 3.5x1-in. disks (18 GB); disk bays are front accessible and support hot-plug

Optional 644 MB Slimline CD-ROM drive; 24X speed

AC input
(Netra T1 AC200)
90 - 264 VAC, 47 - 63 Hz, 2 A(max)
DC input
(Netra T1 DC200)
-40 to -75 VDC, 4 A(max)
Input power Netra T1 AC200: 98 W
Netra T1 DC200: 62 W
Heat output 550 BTU/hr, 335 BTU/hr (nominal)
Temperature Operating: 5° C to 40° C (41° F to 104° F)
Nonoperating: -40° C to 70° C (-40° F to 158° F)
Humidity Operating: 5% to 85% relative humidity, noncondensing
Nonoperating: 10% to 95% relative humidity, noncondensing
Altitude Operating: -300 m to 3000 m (-1000 to 10,000 ft.)
Nonoperating: -300 m to 12,000 m (-1000 to 40,000 ft.)
Acoustic noise Operating: < 65 dBA

GR-63-CORE requirements for earthquake risk zone 4
ETSI ETS 300-19-2-3, A1 operating requirements

Number of cords 1
Meets or exceeds the following requirements:
Safety UL 1950/CSA C22.2 No. 950, EN 60950 (73/23/EEC), IEC 950
Emissions CFR Title 47 FCC Part 15, EN 55022 (89/336/EEC)
Immunity EN 50082-1 (89/336/EEC)
Telco environment

Telcordia: GR-63-CORE, GR-1089-CORE, TR-NWT-000295 (pending) Telcordia: SR 3580 NEBS Level 3 (pending)

Certification Safety: cULus Mark, TUV GS Mark, CE Mark
EMC: CE Mark (93/68/EEC), FCC authorized Class A
Dimensions and Weights
Height 44.00 mm (1.73 in.) (1 RU)
Width (without mounting ears) 437.2 mm (17.21 in.)
Depth (with front bezel) 487.4 mm (19.2 in.)
Weight 9 kg (20 lb.)
11.5 kg (25 lb.) shipping

  Copyright � 2011 Sun Microsystems, Inc.  All rights reserved.