| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
|
|
Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | ||
|
|||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sun Blade X6220 Server Module LEDsExternal Status Indicator LEDsInternal Status Indicator LEDs | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LED Name / Color | Status | Description |
|---|---|---|
| Locate Button and Locate LED / White |
Blinking
|
The Integrated Lights Out Manager (ILOM) command: or the Locate Button has been pushed. Pushing the Locate button will cause the Locate LED to blink for 30 minutes. Holding down the Locate button for 5 seconds will initiate a "push-to-test" mode that illuminates all other LEDs both inside and outside the chassis for 15 seconds. |
|
Off
|
The blinking Locate LED can be turned off with the ILOM command:
|
|
| Ready-to-Remove LED / Blue |
On
|
Blade is in 'standby' power mode meaning the main power is off but there is still power to Service Processor and power supply fans. The blade can be removed from the chassis. |
|
Off
|
Normal operation. | |
| Service Action Required LED / Amber |
Off
|
Normal operation. |
|
Slow Blinking
|
A new (unacknowledged) event requiring a service action has been detected. | |
|
On
|
The event has been acknowledged, but the problem still requires attention. | |
| Power/OK LED / Green |
Off
|
Server main power and standby power are off. |
|
Standby Blinking (on for 100m, off for 2900ms)
|
Standby power is on, but main power is off. | |
|
Slow Blinking
|
POST or diagnostics are running. | |
|
On
|
Server is in main power mode with power supplied to all components. | |
| Hard Disk Drive Power/OK / Green |
Fast Blink
|
Normal disk activity. |
|
Slow Blink
|
RAID activity. | |
|
Off
|
No disk activity. | |
| Hard Disk Service Action Required / Amber |
On
|
Hard disk fault has been detected. |
| Hard Disk Ready-to-Remove / Blue | Unused. |
| Button Name | Description |
|---|---|
| Power Button |
Turns the host system on and off. Use a paper clip or other small tipped object to completely press this button.
|
| Reset Button |
Not used in the Sun Blade X6220.
|
| LED Name / Color | Status | Description |
|---|---|---|
| DIMM Fault LED on Ejector Levers/ Amber |
Off
|
No faults detected. |
|
On
|
DIMM fault detected. | |
| CPU Fault LED / Amber |
Off
|
No faults detected. |
|
On
|
CPU fault detected. |
| | | |
|
Copyright © 2011 Sun Microsystems, Inc. All rights reserved. Feedback | |||
| |||
