Sun Blade T6320 Server Module LEDs

LED Name / Color	Status	Description
Locate Button and Locate LED / White	Blinking	The Integrated Lights Out Manager (ILOM) command: set /SYS/LOCATE value=Fast_Blink has been issued or the Locate Button has been pushed.
Locate Button and Locate LED / White	Off	Normal operating state. The Locate LED can be turned off with the ILOM command: set /SYS/LOCATE value=Off or by pushing the Locate button.
Ready-to-Remove LED / Blue	On	Blade is in 'standby' power mode meaning the main power is off but there is still power to Service Processor and power supply fans. The blade can be removed from the chassis.
Ready-to-Remove LED / Blue	Off	Normal operation.
Service Action Required LED / Amber	Off	Normal operation.
	Slow Blinking	A new (unacknowledged) event requiring a service action has been detected.
	On	The event has been acknowledged, but the problem still requires attention.
Power/OK LED / Green	Off	Server main power and standby power are off.
	Standby Blinking (on for 100m, off for 2900ms)	Standby power is on, but main power is off.
	Slow Blinking	POST or diagnostics are running.
	On	Server is in main power mode with power supplied to all components.
Hard Disk Drive Power/OK / Green	Fast Blink	Normal disk activity.
	Slow Blink	RAID activity.
	Off	No disk activity.
Hard Disk Service Action Required / Amber	On	Hard disk fault has been detected.
Hard Disk Ready-to-Remove / Blue	On	Disk is ready to be removed.