---

Servers:

Sun Fire X4600, X4600 M2

501-7588	501-7638
FAB 270-7047 X4600 L	FAB 270-7047 X4600 M2 L

Jumpers

LOCATION	PINS	SETTING	DESCRIPTION
J32	1-2	Out	Interlock Switch Disable (default)
P19	1-2	Out	Force BIOS Recovery (default)
P20	1-2	Out	Clear Password (default)
P21	1-2	Out	Hard Reset (default)
P23	1-2	Out	Kill Switch Disable (default)
P25	1-2	Out	Clear CMOS (default)
P3	1-3	Out	Unknown (default)

Switches

LOCATION	DESCRIPTION
SW1	Locate Button
SW2	Reset Button
SW3	Non Maskable Interrupt Dump Button
SW4	Top Cover Interlock Switch

LEDs

LOCATION	DESCRIPTION
CR41 CR19 CR34 CR35 CR21	-12V Power OK +5V Power OK +12V Power OK +3.3V Power OK +3.3V Aux Power OK
CR28	DVD Activity
CR7 CR9 CR10 CR11 CR31 CR8 CR6 CR29 CR30	SAS1064 Heartbeat SAS1064 Fault 0 SAS1064 Fault 1 SAS1064 Fault 2 SAS1064 Fault 3 SAS1064 Activity 0 SAS1064 Activity 1 SAS1064 Activity 2 SAS1064 Activity 3

Component Locations

LOCATION	DESCRIPTION
J2	100MHZ PCI-X Slot 0 (Silkscreened PCIX Slot 1)
J1	100MHZ PCI-X Slot 1 (Silkscreened PCIX Slot 2)
J3	8-Lane PCI Express Slot 2 (Silkscreened PCIE Slot 3)
J4	8-Lane PCI Express Slot 3 (Silkscreened PCIE Slot 4)
J5	4-Lane PCI Express Slot 4 (Silkscreened PCIE Slot 5)
J6	8-Lane PCI Express Slot 5 (Silkscreened PCIE Slot 6)
J7	8-Lane PCI Express Slot 6 (Silkscreened PCIE Slot 7)
J8	4-Lane PCI Express Slot 7 (Silkscreened PCIE Slot 8)
U1	Dual Port Ethernet Controller 0
U3	525-2247 BIOS
U4	Super I/O
U9	AMD 8132 PCI-X Hypertransport Tunnel
U11	nVIDIA nForce 2200 PCI Express Southbridge
U21	Dual Port Ethernet Controller 1
U25	LSI SAS1064
U27	LSI SAS1064 NVSRAM
U39	ATI Rage XL
U40	Graphics Controller SDRAM
U65	nVIDIA nForce 2050 PCI Express Bridge
U67	525-2245 CPLD Firmware
U74	525-2249 SAS1064 Firmware
XB2	CR2032 Battery

Sun Fire X4600 Codename: Galaxy 4U Sun Fire X4600 M2 Codename: Galaxy 4F

Notes

1. The minimum Solaris operating system is Solaris 10 01/06 x64.
2. Mixing CPU speeds or mixing single-core and dual-core CPUs is not supported.
3. The SAS1064 shares the 100MHz PCI-X bus with PCI-X Slots 0 and 1.
   Installing 33MHz or 66MHz cards slows the bus and may affect internal disk performance.

Motherboard Notes

1. Motherboard 501-7588 includes X4600 BIOS supporting Opteron 880 and 885.
2. Motherboard 501-7638 includes X4600 M2 BIOS supporting Opteron 8000 Series.
3. Motherboards 501-7588 and 501-7638 support X4600 BIOS or X4600 M2 BIOS.
4. BIOS downloads are available at X4600 SW 1.5 and X4600 M2 Firmware Downloads.

CPU/Memory Module Installation Notes

1. Two modules (X4600 M2 only):
   Install in A and B. All other slots are empty.
   Slot A is CPU 0 and B is CPU 1.
2. Four modules:
   Install in A, D, E, and H. Install a CPU Filler board in all other slots.
   Slot A is CPU 0, D is CPU 1, E is CPU 2, and H is CPU 3.
3. Six modules (X4600 M2 only):
   Install in A, B, D, E, F, and H. Install a CPU Filler board in all other slots.
   Slot A is CPU 0, B is CPU 1, D is CPU 2, E is CPU 3, F is CPU 4, and H is CPU 5.
4. Eight modules:
   Install in A, B, C, D, E, F, G, and H.
   Slot A is CPU 0, B is CPU 2, C is CPU 1, D is CPU 3, E is CPU 4, F is CPU 5, G is CPU 6, and H is CPU 7.

References

1. Integrated Lights-Out Manager Administration Guide for ILOM 1.0, 819-1160.
2. Integrated Lights-Out Manager Administration Guide for ILOM 1.1.1, 820-0280.
3. Sun Fire X4600 and X4600 M2 Servers Installation Guide, 819-4341.
4. Sun Fire X4600 and X4600 M2 Servers Service Manual, 819-4342.
5. Sun Fire X4600 and X4600 M2 Servers Diagnostics Guide, 819-4343.
6. Sun Fire X4600 Server Product Notes, 819-4347.
7. Sun Fire X4600 M2 Server Product Notes, 819-5032.
8. Sun Fire X4600 to Sun Fire X4600 M2 Server Migration, 819-5040.
9. Integrated Lights Out Manager for Sun Fire X4600 and X4600 M2 Servers, 819-5432.