Netra E1 PCI Host Interface

Notes

1. The PCI Host Interface requires no device driver software.
2. The Ultra 60 system board requires OBP 3.27v0 (Patch 106455-09).
3. The Netra t1 Model 100/105 requires PCI Shielding Gasket 230-1854.
4. The Netra E1 is compatible with ATM/P 155MMF, ATM/P, 155UTP, HSI/P, SAI/P, and QFE/P.
5. A maximum of two QFE/P boards are supported.
6. Do NOT install two QFE/P boards on the same side of the chassis.
7. Install one QFE/P on the left side of the chassis and one QFE/P on the right of the chassis.

References

1. Netra E1 Installation and Maintenance Manual, 806-6325.
2. Netra E1 Product Notes, 806-6326.