Document Audience:INTERNAL
Document ID:I0826-1
Title:Incorrect LED states on the Expander, CPU, and other Sun Fire 15K/12K boards after a cold start (power on) do not indicate an actual failure
Copyright Notice:Copyright © 2005 Sun Microsystems, Inc. All Rights Reserved
Update Date:2002-05-15

---------------------------------------------------------------------
- Sun Proprietary/Confidential: Internal Use Only -
---------------------------------------------------------------------  
                            FIELD INFORMATION NOTICE
                  (For Authorized Distribution by SunService)
FIN #: I0826-1
Synopsis: Incorrect LED states on the Expander, CPU, and other Sun Fire 15K/12K boards after a cold start (power on) do not indicate an actual failure
Create Date: May/15/02
Keywords: 

Incorrect LED states on the Expander, CPU, and other Sun Fire 15K/12K boards after a cold start (power on) do not indicate an actual failure

SunAlert: No
Top FIN/FCO Report: No
Products Reference: Sun Fire 15K/12K
Product Category: Server / Service
Product Affected: 
Systems affected:
-----------------  
Mkt_ID   Platform   Model   Description       Serial Number
------   --------   -----   -----------       -------------
  -        F15K      ALL    Sun Fire 15K            -
  -        F12K      ALL    Sun Fire 12K            -


X-Options affected:
-------------------
Mkt_ID   Platform   Model   Description       Serial Number
------   --------   -----   -----------       -------------
  -         -         -          -                  -
Parts Affected: 
Part Number      Description   		Model
-----------      -----------   		-----
     -                -                   -
References: 
BugId: 4646745 - Starcat LEDs intermittantly fail on Cold start of the
                 Sun Fire 15000. 
       4648458 - CPU boards in 15K power up with incorrect LED settings.
Issue Description: 
The LEDs on the Expander, CPU, and hsPCI boards of Sun Fire 15K and 12K
systems may fail to light upon cold start.  The failure of the LEDs to
light does not indicate any real problem and there is no impact on
system operation.  However, service personnel may mistakenly reseat or
replace good boards.

A "Cold Start" is a power on defined as:

   . All slot Breakers in the ON position
   . All the 48V Bulk breakers are in the OFF postition.
   . The 48V Bulk breakers are turned ON, one at a time.

After all 12 breakers are turned ON, close inspection shows that some
of the LEDs may not be lit.  This only occurs on initial power up of
the system when it is not under System Management Software (SMS)
control.  The LEDs that fail to light are not consistantly the same.
It can occur on boards in both the front and back of the system and in
any slot position.  Once SMS is up and running, the LED states are
corrected.

This is not a hardware or software problem, but rather a procedural
issue.  SMS needs to be started and polling of the components needs to
occur before the LEDs on the boards are correctly set.  This is the
expected behavior.

This issue is due to the 48V power control logic not being properly
cleared from a static cold start, i.e., boards are inserted w/ AC off
and then AC is enabled to the system.
Implementation: 
---
        |   |   MANDATORY (Fully Proactive)
         ---    
         
  
         ---
        |   |   CONTROLLED PROACTIVE (per Sun Geo Plan) 
         --- 
         
                                
         ---
        | X |   REACTIVE (As Required)
         ---
Corrective Action: 
The following recommendation is provided as a guideline for authorized
Enterprise Services Field Representatives who may encounter the above
mentioned problem.

For Sun Fire 15K and 12K systems, do not rely on board LED status as an
indication of failure when the system is powered up from a cold start.
Do not reseat or replace any boards.  Wait until SMS software has
initialized to see the correct LED status.
Comments: 
None

============================================================================
Implementation Footnote: 
i)   In case of MANDATORY FINs, Enterprise Services will attempt to
     contact all affected customers to recommend implementation of
     the FIN.

ii)  For CONTROLLED PROACTIVE FINs, Enterprise Services mission critical

     support teams will recommend implementation of the FIN  (to their
     respective accounts), at the convenience of the customer.

iii) For REACTIVE FINs, Enterprise Services will implement the FIN as
     the need arises.
----------------------------------------------------------------------------

All released FINs and FCOs can be accessed using your favorite network
browser as follows:

SunWeb Access:
--------------
* Access the top level URL of http://sdpsweb.ebay/FIN_FCO/

* From there, select the appropriate link to query or browse the FIN and

  FCO Homepage collections.

SunSolve Online Access:
-----------------------
* Access the SunSolve Online URL at http://sunsolve.Corp/

* From there, select the appropriate link to browse the FIN or FCO
index.

Internet Access:
----------------
* Access the top level URL of https://infoserver.Sun.COM
--------------------------------------------------------------------------

General:
--------
* Send questions or comments to [email protected]
--------------------------------------------------------------------------
Statusactive