WARNING:Articles moved into the Archived collection were accurate at the "Last Update" date, but are not maintained from that date forward.
As such, Sun disclaims all implied or express warranties with respect to the information contained in such articles.
Document Audience:INTERNAL Archive
Document ID:I0340-1
Title:Auto-eject floppy drive may not eject a diskette from the drive when issued from the "OK" Prompt on 200MHz or greater Ultra Desktop Systems.
Copyright Notice:Copyright © 2005 Sun Microsystems, Inc. All Rights Reserved
Last Updated Date:2004-01-07

---------------------------------------------------------------------
        - Sun Proprietary/Confidential: Internal Use Only -
---------------------------------------------------------------------  
                        FIELD INFORMATION NOTICE
                  (For Authorized Distribution by SunService)
FIN #: I0340-1
Synopsis: Auto-eject floppy drive may not eject a diskette from the drive when issued from the "OK" Prompt on 200MHz or greater Ultra Desktop Systems.
Create Date: Aug/14/97
Keywords: 

Auto-eject floppy drive may not eject a diskette from the drive when issued from the "OK" Prompt on 200MHz or greater Ultra Desktop Systems.

Product Category: System
Product Affected: 
Sun Ultra 1 Model 200E
 	Sun Ultra 2 Model 1200
	Sun Ultra 2 Model 2200
	Sun Ultra 2 Model 1300
	Sun Ultra 2 Model 2300
Parts Affected: 
501-4134-05 or lower	FRU,0Mb Ultra 1 System board
	501-4358-02 or lower	0Mb Ultra 1 System board

	501-3132-13 or lower 	FRU, 0Mb Ultra 2 System board	
	501-2487-07 or lower 	0Mb Ultra 2 System board
References: 
Bug Id: 4068000
Issue Description: 
The current OPENBoot PROM Flash Firmware on 200 MHz or faster model
Ultra Desktop platforms fail to generate a valid floppy eject pulse
(2.0 microsecond min).  Therefore, the floppy diskette may not be ejected
from the floppy drive when the eject command is issued from the "OK"
prompt.  No field problems have been reported as of July 29, 1997 and
only (1) unit has exhibited this problem in manufacturing's Initial
System Test(IST), however the problem can be duplicated in a
laboratory.  This problem has been observed, especially with new floppy
drives, P/N 370-3212-01, that meet the drive's specification.

Concern has risen in regards to new production builds as the old floppy
drive, P/N 370-2151-01, is being phased-out due to end of life (EOL)
and a new floppy drive, P/N 370-3212-01, is scheduled to replace the
old floppy drive.  Since the new Floppy drive will be appearing in
X-Options, which may be mated with the fast Ultra Desktop platforms
that contain the current OPENboot PROM Flash Firmware, this problem
maybe observed on those systems.

A Patch is available in the event that there is a need for this
functionality.
Corrective Action: 
Install Patch-ID# 105231-01 or higher, to enable the floppy drive to
eject the diskette from the drive when issued from the "OK" prompt on
the above mentioned Ultra platforms.

Make sure to follow the installation instructions in the README file
for the Patch.
Comments: 
This malfunction may not be observed on all systems, as some floppy
drives exhibit more robustness than others.  Most customers will not
perceive this as a problem because it does NOT occur at a Unix prompt
or during a file manager operation.

A new release of the Flash OPENBoot PROM Firmware will be issued in the
form of a patch, as in previous Flash Firmware updates, in the
September '97 timeframe to correct this issue.


-------------------------------------------------------------------------
SunWeb Access: 
______________

All released FINs and FCOs can be accessed internally on the SunWeb using
your favorite network browser as follows:
 
* Access the top level URL of http://cte.corp/FIN_FCO/
 
* From there, select the appropriate link to query or browse the FIN and
  FCO Homepage collections.
 
Supporting documents for FIN/FCOs can be found on Edist.  Edist can be 
accessed internally at the following URL: http://edist.corp/.
  
* From there, follow the hyperlink path of "SunService Documentation" and 
  click on "FIN & FCO attachments", then choose the appropriate folder, FIN
  or FCO.  This will display supporting directories/files for FINs or FCOs.
 
--------------------------------------------------------------------------
General:
________
 
Send questions or comments to [email protected]
 
--------------------------------------------------------------------------
Statusinactive