KMS/OKM - How to Pull ELOM Event Logs

Asset ID:	1-71-1320584.1
Update Date:	2011-05-10
Keywords:

Solution Type Technical Instruction Sure

Solution 1320584.1 : KMS/OKM - How to Pull ELOM Event Logs

Applies to:

Oracle Key Manager - Version: 2.0.0 and later [Release: 2.0 and later ]
Information in this document applies to any platform.

Goal

How to pull ELOM event logs.

Solution

KMS ELOM report event logs errors under GUI, System Monitoring/Event log Tab.

If errors/warnings exists and require detail analysis they must be pulled off ELOP using ipmitool utility.

Download ipmitool from MOS patches - patch number 10319932.
Tool runs on Windows and Solaris.

Once installed run the following to extract event logs:

# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> sel elist
# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> fru
# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> sensor
# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> sunoem led get all
# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> sunoem sbled get
# ipmitool -I lan -H <ILOM IP address> -U <ILOM Username> sdr elist
Attachments

This solution has no attachment