Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1319385.1
Update Date:2011-05-04
Keywords:

Solution Type  Technical Instruction Sure

Solution  1319385.1 :   SL500 - How to Change CAP From I/O to Storage Cell Function  


Related Items
  • Sun StorageTek SL500 Modular Library System
  •  
Related Categories
  • GCS>Sun Microsystems>Storage - Tape>Libraries - SL-Series
  •  




In this Document
  Goal
  Solution


Applies to:

Sun StorageTek SL500 Modular Library System - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

SL500 - How to Change CAP From I/O to Storage Cell Function

Solution

To change the function of the CAP (Cartridge Access Port) from I/O (Input/Output) operation to Storage cells, the following must be done:

Log in to CLI port.
Enter the command: cap x io or storage  (x = module number)

     Example: cap 1 storage 
                      cap 1 io

A reboot of the SL500 is needed to enable the change.  The default of the CAP is I/O.
A Field Service Representative is required to enable this function.  It is not available via SL Console.

Refer to the SL500 Installation Manual, Chapter 4, Configuring the Library, for command information.

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback