Asset ID:	1-71-1317385.1
Update Date:	2011-04-28
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1317385.1 :   How to Remove and Replace X6440 Compact Flash:ATR:2299:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun Blade X6440 Server Module - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

X6440 Compact Flash Replacement

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
X6440 trained

DELIVERY REQUIREMENT:
schedule with maintenance window

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

* The server must be fully shut down and the power cords disconnected.
* Do not operate the system with empty slots. Always insert a filler panel into an empty slot to reduce the possibility of system shut down.
* Take ESD Precautions.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. If necessary, back up any data that is contained on the Compact Flash module.

2. Power off the server and remove the server module from the chassis

3. Remove the main cover

4. Locate the Compact Flash module underneath the REM board

5. Push the compact flash ejector button to release the module from its holder

6. Grasp the compact flash module and pull it out from under the REM board.

6. Grasp the compact flash module and pull it out from under the REM board.

Installation is the reverse of this procedure.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Verify functionality, no service LEDs or messages

PARTS NOTE:

REFERENCE INFORMATION:

https://support.oracle.com/handbook_private/Systems/SunBladeX6440/component.top.html

Maintenance and Operations Documentation
http://download.oracle.com/docs/cd/E19045-01/blade.x6440/index.html

Attachments

This solution has no attachment