Asset ID:	1-71-1310115.1
Update Date:	2011-04-14
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1310115.1 :   How to Replace a V445 Graphics Card:ATR:1111:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun Fire V445 Server - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to remove and replace a Sun Fire V445 Graphic Card

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
No specific skills required

DELIVERY REQUIREMENT:
Immediate

TIME ESTIMATE: 30 Minutes

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW:
Faulty graphic card

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer should conduct an orderly software system shutdown.

Then power down the system and disconnect the Power Cord.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Powering off the system
2. Remove the top cover
3. Disconnect any external cables attached to the faceplate of the graphic card.
4. Release the latch securing the graphic card to the chassis.
5. Pull the graphic card from its slot
6. Place the graphic card on an antistatic mat
7. Install the new graphic card into its slot
8. Rotate the latch down and secure it with the retaining pin.
9. If necessary, connect any external cables to the graphic card.
10.Install the top cover.
11.Powering on the system

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Performing a reconfiguration boot to recognize the new graphic card.

PARTS NOTE:

REFERENCE INFORMATION:

Sun Fire V445 Server Service Manual.
http://download.oracle.com/docs/cd/E19088-01/

Attachments

This solution has no attachment