Asset ID:	1-71-1310097.1
Update Date:	2011-04-14
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1310097.1 :   How to Replace the V445 Power Cord Kit:ATR:1103:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun Fire V445 Server - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to remove and replace a Sun Fire V445 power cord kit.

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
No specific skills required beyond standard partner training

DELIVERY REQUIREMENT:
As scheduled

TIME ESTIMATE: 15 Minutes

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW:
Faulty Power Cord

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer is not required to perform a system shutdown.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Identify which power cord you will replace. Each power supply has three LEDs that you can view from the rear of the server:

Top LED is on (green): Power supply is operating properly
Middle LED is on (amber): Power supply is faulty and should be replaced
Bottom LED is on (green): Power source to power supply is operating properly

2. Disconnect the power cord from the power supply that you are replacing
3. Install replacement power cord

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

Check LEDs show that replaced PSU is functioning

PARTS NOTE:

REFERENCE INFORMATION:

Sun Fire V445 Server Service Manual
http://download.oracle.com/docs/cd/E19088-01/
Attachments

This solution has no attachment