Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1306114.1
Update Date:2011-04-26
Keywords:

Solution Type  Technical Instruction Sure

Solution  1306114.1 :   How To Remove and Replace V210 Power Supply:ATR:863:0  


Related Items
  • Sun Fire V210 Server
  •  
Related Categories
  • GCS>Sun Microsystems>CAP VCAP
  •  




In this Document
  Goal
  Solution


Applies to:

Sun Fire V210 Server - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How To Remove and Replace V210 Power Supply

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED: (IS A SITE ENGINEER AVAILABLE?)
Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner.

DELIVERY REQUIREMENT: Schedule for immediate replacement within contractual terms.

Estimate AP Duration = 15 minutes

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW: Power Supply Failure

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

System uses a single power supply configuration, the customer should take normal precautions to backup data, notify users of the maintenance and that the system will be powered down. The customer should conduct an orderly software system shutdown.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Follow standard ESD procedures to avoid Electrostatic Discharge

Remove the power supply:

1.Power off the server

2.Disconnect the power cable.

3.Pull down the lever on the back of the power supply unit.

4.Slide the PSU out of the server's chassis by pulling on the PSU lever

Replace the power supply:

1.Locate the replacement PSU in the PSU bay.

2.Slide the PSU into the server until it attaches (seats) to the power distribution board inside.

3.Press the lever until it clicks.

4.Power the server back on.

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN the SYSTEM TO AN OPERATIONAL STATE:

Restart software applications per applicable administration guides to resume system operation.

PARTS NOTE:

REFERENCE INFORMATION: Service Manual and Admin Guide
http://download.oracle.com/docs/cd/E19088-01/



Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback