Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1305980.1
Update Date:2011-04-25
Keywords:

Solution Type  Technical Instruction Sure

Solution  1305980.1 :   How to Remove and Replace a x4200 Fan Module:ATR:1456:0 [VIDEO]  


Related Items
  • Sun Fire X4200 Server
  •  
  • Sun Fire X4200 M2 Server
  •  
Related Categories
  • GCS>Sun Microsystems>CAP VCAP
  •  




In this Document
  Goal
  Solution


Applies to:

Sun Fire X4200 Server - Version: Not Applicable and later   [Release: N/A and later ]
Sun Fire X4200 M2 Server - Version: Not Applicable and later    [Release: N/A and later]
Information in this document applies to any platform.

Goal

How to Remove and Replace a x4200 Fan Module


Video - ATR 1456 (2:17)

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)

Nothing beyond basic partner training to be qualified as a Sun Service Delivery Partner

DELIVERY REQUIREMENT:

Schedule with customer within contractual terms

FIELD ENGINEER INSTRUCTIONS

PROBLEM OVERVIEW:

Defective fan module

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

This component is a hot-swappable CRU

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

1. Open the door to the fan bay and identify the defective fan module.
-Fan module LED lit: The fan module is faulty and should be replaced.
-Fan module LED off: The fan module is operating properly.
2. While holding the fan bay door open, grasp the faulty fan module by its plastic strap and lift it straight up out of the fan bay.

3. Visibly inspect the remaining fans and all air openings for dirt, and advise customer if cleaning is necessary.

4. Installation is the reverse of this procedure.

Caution - When you open the fan bay door, be careful to hold it open with one hand so that it does not spring shut and injure your fingers. Do not hold the fan bay door open for more than 60 seconds while the server is running to avoid overheating the server

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:

None

PARTS NOTE:

N/A

REFERENCE INFORMATION:

http://download.oracle.com/docs/cd/E19121-01/sf.x4200/index.html

TIME ESTIMATE:

30 Minutes
Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback