SL500 - How to Enable and Set Time Using the Network Based Time

Asset ID:	1-71-1304841.1
Update Date:	2011-03-28
Keywords:

Solution Type Technical Instruction Sure

Solution 1304841.1 : SL500 - How to Enable and Set Time Using the Network Based Time

Applies to:

Sun StorageTek SL500 Modular Library System - Version: Not Applicable and later [Release: N/A and later ]
Information in this document applies to any platform.

Goal

How to enable and synchronize the system time with the time server.
Show the command syntax to enable this time command.

Solution

Use the CLI command:

time network

Below is the help printout for the time command.

---------------------------

Using keyboard-interactive authentication.

Password:

SERVICE>> help time

time <print> | <network> | <hh:mm:ss> | <hh:mm>

Print or set the library's time value. Takes the library off of network time if set. The network option re-enables network time.

Depending on the network, it may take several minutes to revert back to network time.

Attachments

This solution has no attachment