Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1303273.1
Update Date:2011-03-14
Keywords:

Solution Type  Technical Instruction Sure

Solution  1303273.1 :   VSM/SVA - How to Request Clean Code  


Related Items
  • Sun StorageTek VSM System
  •  
  • Sun StorageTek V2X SVA Disk System
  •  
Related Categories
  • GCS>Sun Microsystems>Storage - Tape>Tape Virtualization
  •  


How to request VSM/SVA clean code

In this Document
  Goal
  Solution
  References


Applies to:

Sun StorageTek VSM System - Version: 4 to 5C - Release: 4.0 to 5.0
Sun StorageTek V2X SVA Disk System - Version: Not Applicable and later    [Release: N/A and later]
IBM z/OS on System z

Goal

What information is needed to request and generate clean code.

Solution


VSM/SVA Clean Code Request Form

WARNING: A Clean on a VSM or SVA product deletes all pointers to the data.
After a Clean has been initiated, all data is lost and is NOT recoverable.

The person requesting the clean code is responsible for its use.  Be aware that all customer data will be lost.  If there are questions, open a support case to VSM Hardware Tech Support requesting assistance. If necessary, reference any previous case for historical information.
If the box to be cleaned is in response to a failure situation, then provide the current case number, or open a new case to VSM Hardware Tech Support for assistance to verify that CLEAN is the appropriate action to be taken and that it is safe to clean the box.


To request CLEAN microcode:
1) Open a support case for VSM Hardware Support and paste questions and answers from below into case. 
Note: VSM and SVA products are supported by VSM Hardware support

2) Answer all questions below and paste the information in the case.

a) What is the Oracle email address of local FSE?
Clean code will only be mailed to a valid Oracle email.

b) What is the product and version that needs to be cleaned?

c) What is the functional microcode?

d) What is the Serial Number?

e) What is the Site name?

f) What is FSE manager’s name?

g) Why does it need to be cleaned?


3) After the box has been cleaned, delete the CLEAN SRL from the subsystem.

For information on what Clean Code is and does, please see reference doc below (Oracle internal only).

References

https://stbeehive.oracle.com/teamcollab/library/st/VSM-SVA+Hardware+Support/Documents#dcid=334B%3A3BF0%3Aafrh%3A38893C00F42F38A1E0404498C8A6612B000239CB1864

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback