Asset ID:	1-71-1293790.1
Update Date:	2011-03-03
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1293790.1 :   How to Replace the M3000 Power Cord Kit:ATR:2502:0  

In this Document
  Goal
  Solution

---

Applies to:

Sun SPARC Enterprise M3000 Server - Version: Not Applicable and later   [Release: N/A and later ]
Information in this document applies to any platform.

Goal

CAP PROBLEM OVERVIEW: Faulty Power Cord replacement

Solution

DISPATCH INSTRUCTIONS

WHAT SKILLS DOES THE ENGINEER NEED:(IS A SITE ENGINEER AVAILABLE?)
No specific skills required

DELIVERY REQUIREMENT:
As scheduled

Estimate AP Duration = 0.5 hours

FIELD ENGINEER INSTRUCTIONS

WHAT STATE SHOULD THE SYSTEM BE IN TO BE READY TO PERFORM THE RESOLUTION ACTIVITY? :

A data backup is not a pre-requisite but is a wise precaution.
The customer is not required to perform a system shutdown.

WHAT ACTION DOES THE ENGINEER NEED TO TAKE:

Before removing power cords please review <Document 1021044.1> to prevent extended outages.

1. Identify which power cord you will replace.
The power inlets are numbered from 0 on the right hand side when viewed from the rear.
2. Disconnect the power cord from the power inlet that you are replacing
3. Install replacement power cord

OBTAIN CUSTOMER ACCEPTANCE

WHAT ACTION DOES THE CUSTOMER NEED TO TAKE TO RETURN THE SYSTEM TO AN OPERATIONAL STATE:
Check PSU LEDs to show that replaced power cord is functioning

PARTS NOTE:

REFERENCE INFORMATION:
http://download.oracle.com/docs/cd/E19867-01/820-5683-13/820-5683-13.pdf

Attachments

This solution has no attachment