Asset ID:	1-71-1021759.1
Update Date:	2010-04-06
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1021759.1 :   Sun StorageTek[TM] SL8500 Modular Library System ( SL8500 ) - Part Number for Complete Pulley Assembly on Z-Frame Elevator Module  


PreviouslyPublishedAs
275130

Description
Part number for complete pulley assembly on Z-frame elevator module.
This part is needed occasionally when the bearing wears out or becomes noisy.


Steps to Follow
Part numbers are as follows:
Refer to the picture attached to this solution for reference.

Should there be a problem with any part of the pulley, the whole pulley sub-assembly can be ordered via Field Logistics.

- The Right elevator pulley assembly is: PN 419804601
- Left elevator pulley assembly is:  PN 419804501

Refer to the Pulley Replacement Instructions attached to this issue for removal/replacement information.

In the unlikely event that the whole Z Frame elevator module needs to be replaced, refer to <Document: 1022271.1> for PN information.





Product
Sun StorageTek SL8500 Modular Library System

Internal Comments
Information concerning pulley assembly replacement:

Both belt tension settings are self adjusting, engineering originally did not want the field to deal with them but it was determined that the dis-assembly and assembly could be accomplished without too much challenge.

If there are problems getting the elevator pulleys via Field Logistics, Phil Garcia is keeping some available at his desk.



SL8500 Elevator pulley assembly Idler pulley Part number Noisy pulley
Product_uuid
d850dc29-d601-11da-a742-080020a9ed93 | Sun StorageTek SL8500 Modular Library System

Attachments

This solution has no attachment