and later [Release: N/A and later ]
Sun Netra T2000 Server - Version: Not Applicable and later [Release: Unknown Release and later]
Sun Netra T5220 Server - Version: Not Applicable and later [Release: Unknown Release and later]
Sun Netra T5440 Server - Version: Not Applicable and later [Release: Unknown Release and later]
Sun Fire T1000 Server - Version: Not Applicable and later [Release: Unknown Release and later]
All Platforms
Goal
Inadequate resources(CPU/MAU/Memory)assigned in LDOM configurations can
resulted in various issues on the LDOM domains. This document provide
steps to check through to ensure appropriate resources are assigned to
LDOM domains.
This document provides steps to verify and set the LDOM configurations
to ensure that the appropriate resources (VCPU/Memory/MAU) are
assigned to the LDOM domains. However, the actual amount of each
resources needed to be allocated is dependent on the guest operating
system. For recommended and minimum resource requirements,
please refer to the installation guide for the operating system you are
using.
Symptoms:
LDOM performance slow
Unable to
enable crypto unit
Unable to jumpstart
Unable to boot
Unable to
create domain.
Domain hang
Unable to add moreVCPUs/MAUs
Unable
to install OS
Solution
Available Documents:
For Solaris 10 resource requirements, please refer to “System Requirements and Recommendations” in
the Solaris 10 Installation Guide: Planning
for Installation and Upgrade available on http://download.oracle.com/docs/cd/E19253-01/821-0441/index.html.
Further details on various LDOM system requirements, please refer to the Release Notes of the specific version of Logical Domian Manager available on http://download.oracle.com/docs/cd/E19608-01/index.html .
Please note that Primary domain is also referred as Control domain.
Steps to Follow
Do take note that this document provides only steps to review and define resources assigned to a domain. It does not provide or recommend any actual amount of resources to be allocated as this is dependent on the actual guest operating system and applications requirements.
Do take note that this document provides only steps to review and define resources
assigned to a domain. It does not provide or recommend any actual amount of
resources to be allocated as this is dependent on the actual guest operating system and applications requirements.
Definitions
VCPU
Virtual Central Processing Unit. The CPU threads residing the sun4v cpus are
presented as VCPUs within LDOM nomenclature. Each CPU thread corresponds to
a VCPU.
Memory
Memory assigned to the domain. Unit in default in bytes. Can be specified
in gigabytes(G), kilobytes(K), or megabytes(M).
MAU
Modular Arithmetic Unit, also know as cryptographic unit available in the
sun4v processors.
LDOM configuration can reviewed and amended through the
/opt/SUNWldm/bin/ldm(1M)
command. Here we outline the steps to review and then steps to amend VCPU,
Memory and MAU resources assigned to a domain.
Review VCPU/Memory/MAU assigned to a domain
A summary of resources allocated to all domains on the system can be displayed
with the
ldm(1M) list subcommand.
For example:
# /opt/SUNWldm/bin/ldm list
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
primary active -n-cv SP 8 4G 17% 32d 2h 3m
guestdom1 active -n--- 5001 4 4G 0.5% 38d 13h 44m
guestdom2 active -n--- 5002 4 4G 1.0% 38d 13h 45m
guestdom3 active -n--- 5003 4 4G 0.7% 38d 13h 45m
guestdom4 active -n--- 5004 4 4G 1.2% 38d 13h 46m
guestdom5 active -n--- 5005 4 4G 0.8% 38d 13h 48m
guestdom6 active -n--- 5006 4 4G 0.7% 38d 21h 58m
For an extensive review of the resources allocated to a specific domain,
please use the
ldm(1M) list-domain sub command.
Take note of the
VCPU,
MEMORY and
MAU section for
the individual resources assigned to the domain.
For example:
# /opt/SUNWldm/bin/ldm list-domain -l guestdom1
NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME
guestdom1 active -n--- 5001 4 4G 0.4% 38d 13h 51m
SOFTSTATE
Solaris running
VCPU
VID PID UTIL STRAND
0 4 100% 100%
1 5 1.1% 100%
2 6 0.9% 100%
3 7 0.0% 100%
MAU
ID CPUSET
0 (8, 9, 10, 11, 12, 13, 14, 15)
MEMORY
RA PA SIZE
0x8000000 0x108000000 2G
0x408000000 0x688000000 2G
...
Setting of VCPU/Memory/MAU resources for a domain
Allocation of VCPU
To set the number of VCPUs for a given domain, use the
ldm(1M) set-vcpu subcommand:
# /opt/SUNWldm/bin/ldm set-vcpu ldom
To add additional VCPUs to a given domain, use the
ldm(1M) add-vcpu subcommand:
# /opt/SUNWldm/bin/ldm add-vcpu ldom
There are limited number of VCPUs on a given machine. There
are times that one may want to reduce the number of VCPUs
from one domain, and then assign them to another domain.
To remove a number of VCPU assigned to a domain, used the
ldm(1M) remove-vcpu subcommand.
# /opt/SUNWldm/bin/ldm remove-vcpu ldom
Allocation of Memory
To set the amount of memory for a given domain, use the
ldm(1M) set-memory sub command:
# /opt/SUNWldm/bin/ldm set-memory ldom
To increase additional memory to a given domain, use the
ldm(1M) add-memory subcommand:
# /opt/SUNWldm/bin/ldm add-memory ldom
There are limited amount of memory on a given machine. There
are times that one may want to reduce the amount of memory
from one domain, and then assign them to another domain.
To remove certain amount of memory assigned to a domain,
used the
ldm(1M) remove-memory
sub command.
# /opt/SUNWldm/bin/ldm remove-memory ldom
Allocation of MAU
MAUs can only be assigned to specific domain only if at
least of the VCPU from the owning processor core is assigned
to the domain. Please refer to Page 19 & 26 of
Beginners Guide to LDOMs, available at www.sun.com/blueprints.
To set the number of MAUs for a given domain, use the
ldm(1M) set-mau subcommand:
# /opt/SUNWldm/bin/ldm set-mau ldom
To add additional MAUs to a given domain, use the
ldm(1M) add-mau subcommand:
# /opt/SUNWldm/bin/ldm add-mau ldom
There are limited number of MAUs on a given machine. There
are times that one may want to reduce the number of MAUs
from one domain, and then assign them to another domain.
To remove a number of MAU assigned to a domain, used the
ldm(1M) remove-mau subcommand.
# /opt/SUNWldm/bin/ldm remove-mau ldom
Saving the new configuration
The newly configured resource, though may have been assigned to
the target domain dynamically, the configurations need to be
saved to the system controller (SC) for it to persist across reboot
of the primary domain.
In order to store the configuration, use the
ldm(1M) add-config subcommand:
# /opt/SUNWldm/bin/ldm add-config config_name
For example, saving the current configuraton as
cfg090221:
# /opt/SUNWldm/bin/ldm add-config cfg090221
On
LDoms 1.0.3 or earlier, issuing the
ldm(1M) list-config
subcommand will show that configuration named
cfg090221 will be the next active
configuration(Though the changes may indeed be already active)
when the primary domain reboots:
# /opt/SUNWldm/bin/ldm list-config
factory-default
initconfig
cfg090113 [current]
cfg090221 [next]
On
LDoms 1.1, issuing the
ldm(1M) list-config
subcommand will show that configuration named
cfg090221 is shown as
[current],
which provides a
better reflection that the changes are already in active and also will
be the next active configuration when the primary domain reboots:
# /opt/SUNWldm/bin/ldm list-config
factory-default
initconfig
cfg090113
cfg090221 [current]
If after the above steps fail to make the necessary resource allocation,
please contact Sun Support with the following information:
- The latest explorer output using the latest version of explorer script.
- The if there is any specific error, please provide session log illustrating
the error concerned.
Please refer to Sun[TM] Explorer X.XX Data Collector for the latest Explorer Script 1002383.1.
Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the "Document Feedback" alias(es) listed below:
Normalization Lead: [email protected]
Normalized, ldom, ldm
Attachments
This solution has no attachment
