How to connect to the CMM ILOM using a Serial Connection on a Sun Blade 6000/6048

Asset ID:	1-71-1019314.1
Update Date:	2011-05-31
Keywords:

Solution Type Technical Instruction Sure

Solution 1019314.1 : How to connect to the CMM ILOM using a Serial Connection on a Sun Blade 6000/6048

Applies to:

Sun Blade T6340 Server Module - Version: Not Applicable and later   [Release: N/A and later ]
Sun Blade X6240 Server Module - Version: Not Applicable and later    [Release: N/A and later]
Sun Blade X6450 Server Module - Version: Not Applicable and later    [Release: N/A and later]
Sun Blade 6048 System - Version: Not Applicable and later    [Release: N/A and later]
Sun Blade T6300 Server Module - Version: Not Applicable and later    [Release: N/A and later]
All Platforms

Goal

This document describes the procedure for accessing the CMM ILOM on the Sun Blade 6000 and 6048 chassis.

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Sun x86 Systems

Symptoms:

Cannot access ILOM on any blade
Cannot access CMM
CMM or ILOMS not responding to external commands

Purpose/Scope:

This document gives details on how to connect to the CMM ILOM on the Sun Blade 6000/6048 Chassis

Solution

Steps to Follow

Steps to connect to the Chassis Monitoring Module (CMM) on a Sun Blade 6000/6048 chassis

You can access the CMM ILOM at any time by connecting a terminal or a PC running terminal emulation software to the serial connector on the chassis.

1. Verify that your terminal, laptop, or terminal server is operational.

2. Configure that terminal device or the terminal emulation software to use the following settings:

8N1: eight data bits, no parity, one stop bit
9600 baud
Disable software flow control (XON/XOFF)

3. Connect a serial cable from the serial port (SER MGT) on the chassis panel to a terminal device using Sun Part# 530-3813 "DB9F to RJ45F, DCE Adapter"

4. Press Enter on the terminal device.

This establishes the connection between the terminal device and the CMM ILOM.

5. Log in to the CLI:

a. Type the default user name root

b. Type the default password changeme

When you have successfully logged in, the CMM ILOM displays the default command prompt:

->

The CMM ILOM is running the CLI. You can now run CLI commands.

6. To log out, type exit

For additional information on using the CMM connection on the Sun Blade 6000/6048 please refer to the:

Oracle Integrated Lights Out Manager (ILOM) CMM Administration Guide for Sun Blade 6000 and 6048 Modular Systems

available in the Oracle Integrated Lights Out Manager (ILOM) 3.0 Documentation

Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective @ domains. To notify content owners of a knowledge gap contained in this document, and/or prior to
updating this document, please contact the domain engineers that are managing this document via the
“Document Feedback” alias(es) listed below:

Domain Lead: [email protected]
Feedback Alias: [email protected]

normalized, 6000, blade, 6048, CMM, can't, login, serial, default

Attachments

This solution has no attachment