Sun[TM] SPARC Enterprise T5120/T5220 Fan Board Removal [Video]

Asset ID:	1-71-1018105.1
Update Date:	2010-10-04
Keywords:

Solution Type Technical Instruction Sure

Solution 1018105.1 : Sun[TM] SPARC Enterprise T5120/T5220 Fan Board Removal [Video]

Applies to:

Sun SPARC Enterprise T5120 Server
Sun SPARC Enterprise T5220 Server
All Platforms

Goal

Description

The purpose of this article is to assist in Sun[TM] SPARC Enterprise T5120/T5220 Fan Board Removals

Video - T5120/T5220 Fanboard Removal (5:00)

Sunsolve users must download the attachment to view the video.

Solution

Steps to Follow

Complete the following steps to remove a fan board:

1. Remove the top cover:

a) Push the 2 fan door latches toward the rear of the server and open the fan door.
b) While depressing the top cover push button latch, slide the cover toward the rear of the chassis approximately 0.5 inch (12 mm).
c) Grasp the cover by its edges and lift it straight up from the chassis.

2. Remove the fan modules.

Note If you are replacing a defective fan module connector board, remove only the fan modules that are necessary to remove the defective fan module connector board.

3. Remove the Phillips screw that secures the fan module connector board to the chassis.

4. Slide the fan board toward the left side of the chassis approximately 0.5 inch (12 mm) to disengage the fan board from the paddle board and the bottom of the chassis.

5. Lift the fan board up and out of the chassis.

To install a fan board, reverse this procedure.

fan board, removal, VT
Previously Published As
91539

Change History
Date: 2009-11-19
User name: Dencho Kojucharov
Action: Updated
Comments: Currency check, audited by Dencho Kojucharov, Entry-Level SPARC Content Lead
Date: 2007-12-14
User Name: 71396
Action: Approved
Comment: Publishing
Version: 1

Attachments

This solution has no attachment