Sun Microsystems, Inc.  Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition
   Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback

Asset ID: 1-71-1017961.1
Update Date:2011-05-31
Keywords:

Solution Type  Technical Instruction Sure

Solution  1017961.1 :   How to Identify if a Solaris[TM] Operating Environment is Installed on a Hardware RAID Controller  


Related Items
  • Sun Fire X4200 M2 Server
  •  
  • Sun Fire X4440 Server
  •  
  • Sun Fire V20z Compute Grid Rack System
  •  
  • Sun Java Workstation W2100z
  •  
  • Sun Ultra 20 Workstation
  •  
  • Sun Ultra 20 M2 Workstation
  •  
  • Sun Fire X2200 M2 Server
  •  
  • Sun Fire X4600 Server
  •  
  • Sun Fire X4500 Server
  •  
  • Sun Fire X4100 Server
  •  
  • Sun Fire V20z Server
  •  
  • Sun Fire X4540 Server
  •  
  • Sun Java Workstation W1100z
  •  
  • Sun Ultra 40 Workstation
  •  
  • Sun Fire V40z Server
  •  
  • Sun Fire X4100 M2 Server
  •  
  • Sun Fire X4200 Server
  •  
  • Sun Fire X4600 M2 Server
  •  
  • Sun Ultra 40 M2 Workstation
  •  
  • Sun Fire X2100 M2 Server
  •  
  • Sun Fire X2100 Server
  •  
Related Categories
  • GCS>Sun Microsystems>Servers>x64 Servers
  •  

PreviouslyPublishedAs
229233


Applies to:

Sun Fire X4200 M2 Server
Sun Fire X4200 Server
Sun Fire X4440 Server
Sun Fire X4500 Server
Sun Fire X4540 Server
All Platforms

Goal

Symptoms:
  • Identify installation configuration.
Purpose/Scope:

This document describes how to identify if a Solaris[TM] operating environment is installed under the control of a platforms hardware RAID management device.

To discuss this information further with Oracle experts and industry peers, we encourage you to review, join or start a discussion in the My Oracle Support Community - Sun x86 Systems

Solution

Description
Summary

This document describes how to identify if a Solaris[TM] operating environment is installed under the control of a platforms hardware RAID management device.

Symptoms
Identify installation configuration.


Steps to Follow


Always perform disk management commands as the root user.


IDENTIFY THE ROOT FILESYSTEM DISK DEVICE:

Use the Solaris df command to identify the Solaris root filesystem disk device (the system disk that contains the operating system root filesystem): 

# df /
/     (/dev/dsk/c1t0d0s0 ):132034832 blocks  8243082 files

In this example, the root filesystem resides on /dev/dsk/c1t0d0s0. Dropping the 's0' partition slice information will leave us with the disk device name: /dev/dsk/c1t0d0, which can be further abbreviated to just c1t0d0 .

( For more detailed information on Solaris disk device naming, refer to Logical Disk device Naming in the System Administration Guide: Basic Administration )


The Solaris format / inquiry command can be used to display the properties of the system disk that will help determine whether the disk is under hardware RAID management control.


NOT UNDER THE CONTROL OF HARDWARE RAID MANAGEMENT:

Run the Solaris format command specifying the disk device name you identified in the previous step (this example uses c1t0d0, however this will be different from system to system):

     # format c1t0d0
     selecting c1t0d0
     [disk formatted]

     FORMAT MENU:
             disk       - select a disk
             type       - select (define) a disk type
             partition  - select (define) a partition table
             current    - describe the current disk
             format     - format and analyze the disk
             fdisk      - run the fdisk program
             repair     - repair a defective sector
             label      - write label to the disk
             analyze    - surface analysis
             defect     - defect list management
             backup     - search for backup labels
             verify     - read and display labels
             save       - save new disk/partition definitions
             inquiry    - show vendor, product and revision
             volname    - set 8-character volume name
             !     - execute , then return
             quit
     format> inquiry
     Vendor:   SEAGATE
     Product:  ST914602SSUN146G
     Revision: 0400
     format>


The Vendor and Product properties reveal the disk drive manufacturer is "SEAGATE" and drive model is "ST914602SSUN146G". This is a physical disk, not a RAID volume.


UNDER THE CONTROL OF HARDWARE RAID MANAGEMENT:

     format> inquiry
     Vendor:   LSILOGIC
     Product:  Logical Volume
     Revision: 3000
     format>


Above, the disk properties identify this disk device as being a Logical (RAID) volume on an LSI controller.

     format> inquiry
     Vendor:   Sun
     Product:  STK RAID INT
     Revision: V1.0
     format>


This last example shows the disk is a RAID Volume on a Sun StorageTek INT RAID controller.


For information on how to check the status of a hardware RAID volume, please see:

How to Identify BIOS and Solaris[TM] Hardware RAID Status (Doc ID 1013107.1)



Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains.

To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the "Document Feedback" alias(es) listed below:
[email protected]
x64, normalized, solaris, RAID
Previously Published As
91489

Change History
Date: 2007-12-13
User Name: 95826
Action: Approved
Comment: - verified metadata
- review date ok : 2008-12-12
- checked normalized data
- checked for TM - 2 added
- checked audience : contract
Publishing
Version: 3

Attachments
This solution has no attachment
  Copyright © 2011 Sun Microsystems, Inc.  All rights reserved.
 Feedback