Asset ID:	1-71-1017380.1
Update Date:	2011-02-09
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1017380.1 :   SL8500 - Front Door Adjustment Process  


PreviouslyPublishedAs
228457

Oracle Confidential (PARTNER). Do not distribute to customers
Reason: Confidential for Partners and Oracle Support personnel

Applies to:

Sun StorageTek SL8500 Modular Library System
All Platforms
Checked for relevance on 9-Feb-2011.

Goal

Revised Front Door Adjustment Process.

Solution

Steps to Follow
Refer to the attached document for the Revised Front Door Adjustment Process.

 

Note: This is a revised version for adjusting the front doors of the SL8500. For the most current version, refer to the Installation Manual. This came out of an investigation into a problem at a major account. The 48v bounced momentarily and booted the bots and HBZ card. Found the original latch pawl adjustment tool did not work and should not be used.

A bad/shorted/loose cable harness going to the door switches or HBN card carrying 48v's can cause the same symptoms and probably to a lesser degree defective door switches are possible.

Latch pawl adjustment, Revised, Door adjustment, SL8500, Front Door Adjustment Process, Front door
Previously Published As STKKB80442

Attachments

This solution has no attachment