SL8500 - Installation Problems and Cautions

Asset ID:	1-71-1015283.1
Update Date:	2011-05-12
Keywords:

Solution Type Technical Instruction Sure

Solution 1015283.1 : SL8500 - Installation Problems and Cautions

Applies to:

Sun StorageTek SL8500 Modular Library System
All Platforms
Checked for relevance on 12-May-2011.

Goal

How to resolve SL8500 modular library system installation problems.

Solution

Steps to Follow
Resolutions to Installation Problems:
If you have an electronics or power issue see the following

Refer to 1011385.1 then to SL8500 Tech tips for SL8500 PDU 48V cable problem resolution.

Refer to 1004381.1 for SL8500 PDU phase LED information.

Refer to 1015771.1 for SL8500 Op Panel reset and calibration procedures.

If you have a logic issue see the following

Refer to 1015771.1 for SL8500 Op Panel reset and calibration procedures.

If you have a connectivity issue see the following

Refer to 1014452.1 for SL8500 Host IP address conflict procedure.

If you have a microcode issue see the following

Refer to 1014118.1 synchronize code between library controller and library sub-systems.

If you have a process issue see the following

Refer to 1014882.1 for SL8500 exerciser routines.

Refer to 1015771.1 for SL8500 Op Panel reset and calibration procedures.

If you have a mechanical or parts issue refer to the following

Refer to 1017287.1 to identify missing or defective install components.

Refer to 1015675.1, 1015089.1, 1013441.1 and for CAP problem analysis and adjustment procedures

Refer to 1014101.1 for SL8500 rail terminator information.

Refer to 1017328.1 for HBC card replacement procedure.

Refer to SL8500 System Replaceable Parts Catalog for missing defective parts identification.

Refer to 1016199.1 and 1017785.1 for SL8500 Array installation problems.

Refer to 1009853.1 and 1014462.1 for SL8500 Foam bumper information.

Refer to 1014577.1 for SL8500 door alignment pin identification.

Refer to 1013256.1 for SL8500 geared track installation procedure.

Refer to 1015771.1 for SL8500 Op Panel reset and calibration procedures.

If you have a tools question see the following

Refer to 1014682.1 for SL8500 exerciser routines.

If you have a cabling issue see the following

Refer to 1013501.1, 1013663.1, 1014719.1 for SL8500 cable issue resolution.

Refer to 1011385.1 for SL8500 PDU 48V cable problem resolution.

How to resolve SL8500 installation problems, SL8500, Install, Electronics, Power, Logic, Connectivity, Cable, Issue
Previously Published As STKKB78545

Attachments

This solution has no attachment