Asset ID:	1-71-1015224.1
Update Date:	2011-02-09
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1015224.1 :   SL8500 - Elevator Wheel/Roller Part Number and Replacement Procedure  


PreviouslyPublishedAs
223148

Oracle Confidential (PARTNER). Do not distribute to customers
Reason: Confidential for Partners and Oracle Support personnel

Applies to:

Sun StorageTek SL8500 Modular Library System
All Platforms
Checked for relevance on 9-Feb-2011.

Goal

Elevator Wheel/Roller Part Number and  Replacement Procedure.

Solution

Description
Elevator Wheel/Roller Part Number and Replacement Procedure

Steps to Follow
SL8500 Elevator Z Carriage Wheel Replacement Procedure:
The 3/4 inch roller is used on both the Robot and Elevator assembly.

The Part number for the roller is: 313797602.  The roller is NOT a standard order part and requires special order through Logistics should one be needed.
The Part number for the Z-Spring Assembly is: 419838103.  It is possible to order the whole Z-spring assembly with the bars and rollers already in place.  This assembly is NOT a standard order part and also requires special order through Logistic using the NOPRT process.  Picture of this assembly is attached to the solution.

Special Note: In steps 9,10, and 11, DO NOT Adjust the Spring Roller Assembly adjustment screw, it is factory set and can not be adjusted properly in the field.

 

Refer to the attached document for Roller Replacement Procedure on the elevator assembly.  This provides complete instructions along with pictures to assist in replacing the Z-Carriage Wheel.

PURPOSE: To repair an elevator assembly in the field that has one or more defective 3/4” carriage wheels.

TOOLS REQUIRED: 1 Torx T15 bit and driver and 1 extended Torx T15(provided).

TIME REQUIRED: 1 CSE hour.

As the roller is the only thing being replaced on the elevator assembly, do NOT remove the Z-carriage assembly from the elevator pull.
Doing so will mess up the tension setting between the assembly and the pull.  It is extremely difficult to re-assemble with the instructions provided.  The main concern is keeping the spring, which rests on the shaft, from becoming cocked during re-assembly.

Elevator roller replacement procedure, How to replace the roller on the elevator, Part number for elevator roller, Z spring assembly, Z-spring, SL8500, Roller, Elevator wheel, Part number, Elevator assembly
Previously Published As STKKB72906



Attachments

This solution has no attachment