L180 - How To Display the FSCs on the L180 Library

Asset ID:	1-71-1014715.1
Update Date:	2011-02-02
Keywords:

Solution Type Technical Instruction Sure

Solution 1014715.1 : L180 - How To Display the FSCs on the L180 Library

Applies to:

Sun StorageTek L180 Tape Library
All Platforms
Checked for relevance on 2-Feb-2011.

Goal

This article describes how to display the FSCs on the L180 Library.

Solution

Steps to Follow
How To Display the FSCs on the L180 Library:
To acquire the FSCs on the L180 library, use the following steps:

Push the 'Menu' button on the Op Panel until "Main Menu" is displayed.
Push the 'Down Arrow' button until it is next to "FSC Log".
Push the 'Select' button.

At this time, the FSC information is displayed on 2 lines for each FSC listed. FSCs are four hexadecimal digits that identify an error on the system. Up to 20 different FSCs can be displayed. The display will provide the following information:

FSC
Number of Occurrences
Location of Error
Time of last Occurrence
Date of last Occurrence

To exit, push 'Menu' button to return to library status.

@ FSC, How to display the FSCs on the L180 library, L180
Previously Published As STKKB1194

Attachments

This solution has no attachment