Sun Netra 1280 Server
 
Sun Fire E2900 Server
 
Sun Fire V1280 Server
 

GCS>Sun Microsystems>Servers>Midrange V and Netra Servers
 
GCS>Sun Microsystems>Servers>Entry-Level Servers
 
GCS>Sun Microsystems>Servers>Midrange Servers
 

bootmode normal

bootmode [diag|skipdiag] [forth] [reset_nvram] bootmode -h

break - Send a break signal to the Solaris console.

break [-y|-n]

break -h

console - Connect to the Solaris/OpenBoot PROM console.

console

console -h

disablecomponent - Add a component to the blacklist.

disablecomponent <component_name> [<component_name> . . .]

disablecomponent -h

enablecomponent - Remove a component from the blacklist.

enablecomponent <component_name> [<component_name> . . .]

enablecomponent -h

flashupdate - Update the flash PROMs in the System Controller, all the system boards, or a specified board number.

flashupdate [-y|-n] -f <URL> all

flashupdate [-y|-n] -f <URL> systemboards|scapp|rtos|<board> ...

flashupdate [-y|-n] -u

flashupdate [-y|-n] -c <source_board> <destination_board>

flashupdate -h

help - Without arguments, list all available LOM commands. When an argument is supplied, display basic usage of the specified command and a short description.

help [<command_name>]

help [<partial_command_name>]

help -h

history - Display the command history along with date and time stamps.

history

history -h

inventory - Display SEPROM contents of a FRU.

inventory

inventory [<board>]

inventory -h

logout - Log out from this connection.

logout

logout -h

password - Set the password for the LOM.

password

password -h

poweroff - Forcibly power off the whole system to standby, or a FRU, or a list of FRUs.

poweroff

poweroff [-y|-n]

poweroff [-y|-n] <fru_name> [<fru_name>...]

poweroff -h

poweron - Power on the entire system, or a FRU, or a list of FRUs.

poweron

poweron [all|<fru_name> [<fru_name>...]]

poweron -h

reset Reset the Solaris system .

reset [-x|-a] [-y|-n]

reset -h

resetsc - Reset the System Controller.

resetsc [-y|-n]

resetsc -h

setalarm - Set the system alarm relays and associated LEDS.

setalarm 1|2 on|off

setalarm -h

setdate - Set the date and time for the system.

setdate [-v] [-t <time zone>] [<mmdd>]<HHMM>

setdate [-v] [-t <time zone>] <mmddHHMM>[[<cc>]<yy>]][.<SS>]

setdate [-v] -r <datehost>

setdate [-v] -t GMT<+|-><offset from GMT>

setdate -h

setescape - Set the sequence of characters used to switch from the Solaris or OpenBoot PROM console to the LOM prompt.

setescape <escapechars>

setescape -h

seteventreporting - The seteventreporting command controls which messages are printed at the LOM prompt and the level of logged messages sent to Solaris. 

seteventreporting on [0|1|2|3|4]

seteventreporting off [0|1|2|3|4]

seteventreporting default [0|1|2|3|4]

seteventreporting -h

setlocator - Set the state of the system Locator LED.

setlocator on|off

setlocator -h

setupnetwork - Set up System Controller network attributes.

setupnetwork

setupnetwork -h

setupsc - Configure optional System Controller features.

setupsc

setupsc -h

showalarm - Display state of system alarm relays and LEDs.

showalarm 1|2|system

showalarm -h

showboards - Display the status for all boards in the system

showboards [-ev] [-p <part>] ...

showboards -h

showcomponent - Display a component or a list of components.

showcomponent [-v] <component_name> [ <component_name> . . . ]

showcomponent -h

showdate - Display the current date and time for the system.

showdate [-tv]

showdate -h

showenvironment - Display the current environmental status, temperatures, voltages, fan status, and so on, for the system..

showenvironment [-ltuvw] [-p <part>] [<component>]

showenvironment [-ltuvw] [<component>]

showenvironment -h

showescape - Display the current escape sequence.

showescape

showescape -h

showeventreporting - Display the settings applied to the LOM software event reporting and messages.

showeventreporting

showeventreporting -h

showfault - Display the state of the system Fault LED.

showfault

showfault -h

showhostname - Display the system hostname.

showhostname

showhostname -h

showlocator - Display the state of the system Locator LED.

showlocator

showlocator -h

showlogs - Display the message event log.

showlogs

showlogs -h

For systems configured with enhanced-memory SCs (SC V2s), the following command shows the system error contents maintained in the persistent buffer.

showerrorbuffer -p

showlogs -p

showmodel - Display the platform model.

showmodel

showmodel -h

shownetwork - Display System Controller (LOM) network settings and MAC addresses.

shownetwork [-v]

shownetwork -h

showresetstate - Display the CPU registers after an abnormal Solaris reset. 

showresetstate [-w|-s|-v] [-f <URL>]

showresetstate -h

showsc - Display version and uptime information about the System Controller.

showsc [-v]

showsc -h

shutdown - Shut down Solaris and enter standby mode.

shutdown

shutdown -h

testboard - Test the specified CPU/Memory board.

testboard [-f] <board_name>

testboard -h

This solution has no attachment