| Home | Current Systems | Former STK Products | EOL Systems | Components | General Info | Search | Feedback |
| Sun System Handbook - ISO 3.4 June 2011 Internal/Partner Edition | ||
|
|
||
 |
||||||||||||
Solution Type Technical Instruction Sure Solution 1012221.1 : How to enable multiple serial consoles on Netra[TM] ct400/800
PreviouslyPublishedAs 216851 Description This document will describe how to enable and set up multiple serial consoles on the Netra[TM] ct400 and Netra[TM] ct800 systems on both Solaris[TM] 8 and Solaris[TM] 9 Operating Systems. This is for systems that use the CP1500 CPU card. Steps to Follow For Solaris 8 you must be at Solaris 8 Update 7 FCS or later and have the following patches installed in this order: 110790-04 or greater (Netra ct OBP PROM Update) For Solaris 9 you must have the following patches installed in this order: 113534-01 (Netra ct 1.0: OBP update for SUNW,UltraSPARC-IIi-Netract) After installing the patches, reboot the system. To enable ttymux 1. Bring the system down to OBP level At OBP level, 2. Run the following 2 commands to enable multiplexor feature. ok setenv input-device input-mux ok setenv output-device output-mux 3. Reset the machine. ok reset 4. Reboot the system. ok boot -r To disable the ttymux 1. To disable ttymux you need to be in alarm console (rsc prompt) 2. Type "reset" on the alarm console 3. Run the following 2 commands. ok setenv input-device ttya ok setenv output-device ttya 4. Reset the machine. ok reset 5. Boot the machine. ok boot Note: When you install/upgrade the OS or backout this patch, you should DISABLE the ttymux before the OS installation/upgrade or the patch removal. Product Netra ct 400 Server Netra ct 800 Server console, ttymux, serial, multiple Previously Published As 77722 Change History Date: 2006-06-07 User Name: 71396 Action: Add Comment Comment: *** This is an automatic message. This document has received 0 hits in Sunsolve in 60 days (see http://krep.emea.sun.com/stats/dochistory.cgi?docid=77722 ). If it does not receive any hit in the next 30 days, it will be automatically archived. See http://kmo.central.sun.com/VAM/ for further details. *** Version: 0 Date: 2004-08-19 User Name: 7058 Action: Approved Comment: Got confirmation from Scott to go ahead and publish as contract doc. Also, t takes a different set of patches for the 410/810, per Don's suggestion so Scott will write another doc on them when he gets time. Publishing doc. Version: 3 Date: 2004-08-19 User Name: 7058 Action: Add Comment Comment: Hi Robert, I have 2 quick questions about doc ID 77722 before I publish. 1. Did you want to add in info on the Netra 410/810 per Don Palko's comments? 2. Is there any special reason why the audience for this document needs to be internal only? Can it be available to customers? If so, I can adjust the audience setting to "free" or "contract" customers, whatever you prefer. Please email me your thoughts on these questions and then I'll publish your document. Thanks much, nita [email protected] Version: 0 Date: 2004-08-19 User Name: 7058 Action: Accept Comment: Version: 0 Date: 2004-08-18 User Name: 27596 Action: Approved Comment: Scott, Well done. On its way to Final review. BTW - how anout for 410/810? Regards, Don Don Palko --------- Product Technical Support Engineer Volume Server Products (VSP) Product Technical Support (PTS) Sun Support Services Sun Microsystems, Inc., Burlington, Ma. Primary # 781-442-1371 (x21371) Cell Phone: 781-258-0825 Email: [email protected] Version: 0 Date: 2004-08-18 User Name: 27596 Action: Accept Comment: Version: 0 Date: 2004-08-18 User Name: 116203 Action: Approved Comment: Please look this over for approval Version: 0 Date: 2004-08-18 User Name: 116203 Action: Created Comment: Version: 0 Product_uuid 299bd26e-0a18-11d6-85ae-b00895a52321|Netra ct 400 Server 29a04d1c-0a18-11d6-8e54-e4fcf1214b85|Netra ct 800 Server Attachments This solution has no attachment |
||||||||||||
|
||||||||||||