Sun Fire X4200 M2 Server
 
Sun Fire X4600 M2 Server
 
Sun Fire X4100 Server
 
Sun Fire X4100 M2 Server
 
Sun Fire X4600 Server
 
Sun Fire X4200 Server
 
Sun Fire X4500 Server
 

GCS>Sun Microsystems>Servers>x64 Servers
 

Patch ID: 119131-22 SunOS 5.10_x86: Sun[TM] Fibre Channel Device Drivers
Patch ID: 120223-10 SunOS 5.10_x86: Emulex-Sun[TM] Fibre LightPulse Channel Adapter driver
Patch ID: 119471-06 SunOS 5.10_x86: Sun[TM] Enterprise Network Array firmware and utilities
Patch ID: 118844-30 SunOS 5.10_x86: kernel Patch
Patch ID: 119471-06 SunOS 5.10_x86: Sun[TM] Enterprise Network Array firmware and utilities

Follow the instructions to install each patch on your SunOS[TM] 5.10_x86 system.
Reboot your system.

Install the FCA Utilities from EMULEX. You can find the Utilities for
SunOS 5.10_x86 here:
http://www.emulex.com/en/downloads/oracle/drivers/solaris.html

To install the utilities kit using the emlxu_install script, do the following:
1. Log in as root, or su to root.

2. Copy the utilities kit from your distribution medium into a directory, referred to here as <directory>. The utilities kit is a .tar file named something similar to emlxu_kit-1.00x-sparc.tar.

3. Change to the directory where you put the kit tar file by typing

cd <directory>

4. Extract the emlxu_install script from the tar file by typing

tar xf emlxu_kit-1.00x-sparc.tar emlxu_install

5. Install the kit by typing

./emlxu_install

6. The script removes any earlier verison of the emlxu utilities package. (If an earlier package is not found, this fact is indicated; skip to step 9.) The following text is displayed:

<Removing old EMLXemlxu package>

7. If an old package is installed, you are prompted to remove it:

Do you want to remove this package? [y,n,?,q]

8. Enter y. The following message is displayed:

Removal of <EMLXemlxu> was successful.

9. The script expands the utilities kit .tar file and begins installing the new package. The following message is displayed:

<Expanding emlxu_kit-1.00x-sparc.tar>
<Adding new package>

10. The script installs the emlxu utilities package. The package is prepared for installation and you are prompted for confirmation by the following message:

Do you want to continue with the installation of <EMLXemlxu> [y,n,?]:

11. Enter y. The installation package provides running commentary on the installation process.

12. Examine the output for any errors or warnings. If the installation is successful, the following message is displayed near the end of the process:

Installation of <EMLXemlxu> was successful.

After this, download the OpenBoot (FCode) version for SunOS 5.10_x86:
http://www.emulex.com/downloads/oracle

Unzip the file an Type

# emlxadm

You see a new prompt

emlxadm>

Downloads the specified boot image file to the HBA.
Example:

 emlxadm> download_boot TL501A9.PRG

 Image Components: REL type   size=149048
DWC file:       BOOT: version=03845059, 5.01a9

 Current: Boot: 5.01a4
New:     Boot: 5.01a9   149048 (0x24638) bytes

 Are you sure you want to download this image? (y or n): y

 Downloading...

 Result: Operation successful.
Done.

SUN hardware doc page:
http://www.oracle.com/technetwork/documentation/oracle-storage-networking-190061.html

This solution has no attachment