C4 Tape Library - How to collect Failure Analysis File to Troubleshoot Tape Library

Asset ID:	1-71-1008240.1
Update Date:	2011-01-03
Keywords:

Solution Type Technical Instruction Sure

Solution 1008240.1 : C4 Tape Library - How to collect Failure Analysis File to Troubleshoot Tape Library

Applies to:

Sun Storage C4 Tape Library
All Platforms
Checked for relevance on 3-Jan-2011.

Goal

Description
The Oracle/StorageTek[TM] C4 Tape Library includes a command-line utility to gather the Failure Analysis File.

This document describes how to use that utility.

Solution

Steps to Follow
Connection to the C4 library can be achieved via a service PC into the serial port on the C4, or via C4 web management utility.

Obtaining the fa log via the serial port

To connect a service PC to the C4 library:

Using the 9-pin RS-232 to 3mm cable provided with the library, connect the 9-pin connector a COM port on a local PC and to the serial port on the library system controller board (SCB).
Open a HyperTerminal window on the service PC and set the following properties:
?Baud rate = 38400
?Data bits = 8
?Parity = none
?Stop bits = 1
?Flow control = none
?Emulation = ANSI
Type to access the command prompt.
From the Transfer menu at the top of Hyper Terminal, select the Capture Text...
Enter a file name and click Start.
At the command prompt, type fa and press .

After the command has executed, select Stop from the Capture Text menu. Have this text file available when contacting Sun service support.

Obtaining the fa log via the web management utility

On the host computer, open the internet browser software.
In the Address field, type http://IPaddress/service.html where IP address is the IP address for the C4 tape library.
This will bring you to a service page where we will need to enable telnet.
The user and password are service and ATLfse.
Once telnet is enabled, open hyperterminal and connect to the ip of the library.
You will see a prompt PX500>
Log in using service and ATLfse
Now enable a capture text in Hyperterminal.
Type fa and the failure analysis file will come down.

After the command has executed, select Stop from the Capture Text menu. Have this text file available when contacting Sun service support.

Internal Comments
NOTE: This document to remain internal only as the main body of the document contains service username and password to access the protected pages of the C4 library and must not be given to customers.

c4, fa, failure analysis, service
Previously Published As 89692

Attachments

This solution has no attachment