Asset ID:	1-71-1007676.1
Update Date:	2009-02-23
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1007676.1 :   Sun Fire[TM] 280R picld detects a disk fault if Solaris[TM] boots from an external boot disk  


PreviouslyPublishedAs
210633

Description
If Solaris[TM] boots from an external boot disk, the following error message may be logged on console or /var/adm/messages:

Dec 21 15:26:57 stlab152 picld[59]: [ID 961923 daemon.error] WARNING: Device DISK0 failure detected by sensor DISK0_FAULT_SENSOR
Dec 21 15:26:57 stlab152 picld[59]: [ID 961923 daemon.error] WARNING: Device DISK1 failure detected by sensor DISK1_FAULT_SENSOR
Dec 21 15:32:27 stlab152 picld[59]: [ID 449286 daemon.error] Device DISK0 OK
Dec 21 15:32:27 stlab152 picld[59]: [ID 449286 daemon.error] Device DISK1 OK

Steps to Follow
The above message is usually logged when you change run levels from single user
mode to multi user mode. This is not an actual disk error and can be ignored
because it just shows that the internal drives have not completely spun up yet.

Product
Sun Fire 280R Server

picld, littleneck, DISK0_FAULT_SENSOR, DISK1_FAULT_SENSOR, SF280R
Previously Published As
79731

Change History
Date: 2004-12-23
User Name: 36642
Action: Approved
Comment: put the right information in the description part of the document
updated trademarks and spelled out acronyms as is required
publishing.
Version: 3
Date: 2004-12-22
User Name: 36642
Action: Accept
Comment:
Version: 0
Date: 2004-12-22
User Name: 82799
Action: Approved
Comment: Made a few minor changes to the wording for clarity sake.

Attachments

This solution has no attachment