Asset ID:	1-71-1006381.1
Update Date:	2009-09-30
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1006381.1 :   Sun Enterprise[TM] 10000: How to set control board frequency on e10k  


PreviouslyPublishedAs
208952

Description

This document will show you how to set the control board clock frequency on an Sun Enterprise[TM] 10000.

Steps to Follow

1) Login in each domain on the e10k frame and bring each domain down. (`init 0`)
*** NOTE: BRING ALL DOMAINS DOWN OR YOU MAY CRASH ANY RUNNING DOMAINS ***

2) Power off all system boards on the frame with the power command
power -off -sb 0 1 2 ... (validate how many system boards are on your frame)

3) Issue the sysclock command. The syntax varies depending on the speed of the CPUs on your System boards. You can determine your CPU speeds with the `/usr/platform/sun4u/sbin/prtdiag` command.

Below are the sys_clock settings for the various processor speeds.

* 250 Mhz
o sys_clock -p three-to-two -s -i  83333333
* 333 Mhz
o sys_clock -p two-to-one -s -i  83333333
* 400 Mhz
o sys_clock -p two-to-one -s -i 100000000

      o   400 Mhz 8Mb cache notes

       1. Mixing module speeds within a system is not supported.
2. A minimum of one processor per System Board is required.
3. Set the clock multiplier to 2:1 with the sys_clock (1m) ssp command.
4. System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 400MHz UltraSPARC module.
5. System Boards 501-5240, 501-5278, and 501-5279 are compatible with the 400MHz UltraSPARC module.
6. Solaris 2.5.1 (with patch > 103640-27), 2.6 (with patch > 105181-14.), and 2.7 are supported.
7. Use the limit-ecache-size OBP command before installing Solaris 2.5.1 and before booting Solaris 2.5.1 without patch 103640-27.
8. Use the limit-ecache-size OBP command before installing Solaris 2.6 and before booting Solaris 2.6 without patch 105181-14.

* 466 Mhz
o sys_clock -p five-to-two -s -i  93000000

       1.The minimum SSP release is 3.3.
2.Patch >=108885-08 (SSP 3.3) or >=110304-05 (SSP 3.4) is required.
3.Patch >=103640-28 (Solaris 2.5.1) or >=105181-14 (Solaris 2.6) is required.
4.Mixing module speeds within a system is supported.
5.A minimum of one processor per System Board is required.

       Compatibility Notes:
1.Control Board 501-5494 is required for a 5:2 clock.
2.Control Boards 501-4345 and 501-4839 do not support a 5:2 clock.
3.System Boards 501-5240, 501-5278, 501-5279, and 501-5693 are compatible with the 466MHz UltraSPARC module.
4.System Boards 501-4347, 501-4786, and 501-4903 are not compatible with the 466MHz UltraSPARC module.

       See Notes for 464/466Mhz on other platforms

4) Power back on all system boards (with the power command).
power -on -sb 0 1 2 ... (validate how many system boards are on your frame)

5) Bring up domains on the frame. Use the bringup command with the most appropriate level for your environment (level 64 is common but can extend bringup times on domains due to extended diagnostics being run.

6) Both control boards should be running at the same clock frequency at this point (100 Mhz).

Product
Solaris 7 Operating System
Solaris 9 Operating System
Solaris 8 Operating System
Sun Enterprise 10000 Server

Previously Published As
80854

Change History
Date: 2006-01-19
User Name: 7058
Action: Update Canceled
Comment: *** Restored Published Content *** SSH AUDIT
Version: 0
Date: 2006-01-19
User Name: 7058
Action: Update Started
Comment: SSH AUDIT
Version: 0
Date: 2005-06-19
User Name: 7058
Action: Approved
Comment: Warning now in place per customer feedback.
Formatting looks correct in preview.
Updated Review date.
OK to republish.
Version: 7
Date: 2005-06-19
User Name: 7058
Action: Accept
Comment:
Version: 0
Date: 2005-06-17
User Name: 86925
Action: Approved
Comment: Formatting changes look better.
Version: 0
Date: 2005-06-09
User Name: 85550
Action: Approved
Comment: enabled markup to fix preview formatting issues...the two to one for 333 MHz was taken from an HAS engineer's e-mail but I confirmed it's what was sent to me.
Version: 0
Date: 2005-06-09
User Name: 86925
Action: Rejected
Comment: Hank,
You might want to get processor speeds from "psrinfo -v". It is easier to see that prtdiag

If you look at this doc in "preview" you will see that is gets all smashed together and you lose the functionality of your indentations. I don't know how to fix it, but it makes it very hard to read.

Can you verify the clock multiple for sys_clock settings? For some reason 333Mhz at two to one looks wrong to me.

Thanks!
Scott
Version: 0
Date: 2005-06-09
User Name: 85550
Action: Approved
Comment: add warning about bringing domains down
Version: 0
Date: 2005-06-09
User Name: 85550
Action: Update Started
Comment: add warning of domain crash
Version: 0
Date: 2005-06-09
User Name: 111868
Action: Add Comment
Comment: I've received folllowing feedback:

Customer comment from [[email protected]] via the [Public Feedback Form]

----------------------------------------------------------------------

Email: [email protected]
Contact: David Brown
Comments: When I tried to DR 2 boards in an E10K
domain i got exitcode 71, searching the exit
code in sulsolve got me to Infodoc 80856.
While following the procedures described in
Infodoc 80856 all of my 8 domains in the E10K
stopped and rebooted.
There wast just a little comment to
additional information in Infodoc 80854.
But in Infodoc 80854 the first line in capitals :
"NOTE: BRING ALL DOMAINS DOWN OR YOU MAY
CRASH ANY RUNNING DOMAINS"
If in Infodoc 80856 this was also mentioned,
I did not crash my 8 domains.

----------------------------------------------------------------------

please consider update of the article or let me know otherwise.

Regards
Richard Wilczek KE
Version: 0
Date: 2005-04-26
User Name: 71396
Action: Approved
Comment: Performed final review of article.

Updated product name and trademarking.

Changed audience from free to contract per the FvF sigma program and Mark Bennett.

Publishing.
Version: 3
Date: 2005-04-25
User Name: 71396
Action: Accept
Comment:
Version: 0
Date: 2005-04-25
User Name: 103111
Action: Approved
Comment: pls review
Version: 0
Date: 2005-03-22
User Name: 85550
Action: Approved
Comment: bob, pls review...
Version: 0
Date: 2005-03-22
User Name: 85550
Action: Created
Comment:
Version: 0
Product_uuid
a723cbe0-2bd5-11d6-8430-f07db3f28928|Solaris 7 Operating System
4f82caac-36f3-11d6-866b-85f428ef944e|Solaris 9 Operating System
a7a38948-2bd5-11d6-98ce-9d3ac1c0cfd7|Solaris 8 Operating System
29ddef46-0a18-11d6-92de-ae47474f0f6c|Sun Enterprise 10000 Server

Attachments

This solution has no attachment