Asset ID:	1-71-1005598.1
Update Date:	2010-10-01
Keywords:

---

Solution Type  Technical Instruction Sure

Solution  1005598.1 :   How to partition a logical drive on a Sun StorageTek[TM] 3310, 3320, 3510 or 3511 array [Video]  


PreviouslyPublishedAs
207771

Applies to:

Sun Storage 3310 SCSI Array
Sun Storage 3320 SCSI Array
Sun Storage 3510 FC Array
Sun Storage 3511 SATA Array
All Platforms

Goal

This document describes how to partition a logical drive on a Sun StorageTek[TM] 3000 series array.
Video - Partitioning a Logical Drive (04:57)

Solution

How do I partition a logical drive on a Sun StorageTek[TM] 3310, 3320, 3510 or 3511 array?

Partition a logical drive with sccli:

# sccli configure partition [ | delete]

partition ID - Specifies a combination of LD-ID/LV-ID and partition-number in XXXXXXXX-PP format where XXXXXXXX represents the Logical Drive/Volume ID, or a combination of LD/LV Index and partition number in ld{X}/lv{X}-PP format where LD/LV Index is the Logical Drive/Volume Index number. PP is a two-digital hexidecimal number that represents the partition number.

size - Specifies the partition size in MB, such as 4000MB. To delete a partition, specify a size of 0. Or, use the delete keyword.

delete   To delete a partition, specify the delete keyword. All partitions in the logical drive or logical volume must be unmapped for this argument to take effect.

Note - Changes to a partition cause the next-higher-numbered partition to shrink or grow. Any change in the size of one partition causes the dimensions of the partition next to it to change as well, invalidating whatever data might be stored on both partitions. Before implementing a new partition layout, the layout is displayed and the user is warned that data in the old partitions will be lost. The user is prompted to continue.

Example:

Partition a logical drive with telnet or serial port connection:

1.  Telnet or tip to the array.

For example, type:

# telnet 10.1.229.120

10.1.229.120 is the address of your Sun StorEdge disk.

Or

# tip -38400 /dev/ttyb

2.  From the main menu, select   View and edit Logical drives 

3.  Select the logical drive you want to partition.

4.  Select  Partition logical drive. 

5.  If the logical drive has not already been partitioned, select 'yes' only if the logical drive is going to be partitioned.

6.  A list of partitions on this logical drive is displayed. If the logical drive has not yet been partitioned, all the logical drive capacity is listed as  partition 0 .

Select a partition.  A partition size is displayed.

7.  Type the desired size of the selected partition.

8.  Choose 'yes' to confirm. The remaining capacity of the logical drive is automatically allocated to the next partition.

A maximum of 32 partitions can be created.

See the following documents for additional troubleshooting information:

<Document:1009196.1> Sun StorEdge[TM] 3510: How to Map Partitions to Multiple Hosts in a SAN Using Host Filters

  <Document: 1005313.1> Troubleshooting Sun StorEdge 33x0/ 351x Configurations

Product
Sun StorageTek 3511 SATA Array
Sun StorageTek 3510 FC Array
Sun StorageTek 3320 SCSI Array
Sun StorageTek 3310 SCSI Array

3310, 3320, 3510, 3511, logical drive, partitions
Previously Published As
90513

Change History
Date: 2009-12-03
User Name: [email protected]
Action: Updated
Comment: Currency check, updated steps to follow
Version: 9
Date: 2007-12-18
User Name: 7058
Action: Approved
Comment: Updates OK to publish.
Version: 9
Date: 2007-12-17
User Name: 7058
Action: Accept
Comment:
Version: 0
Date: 2007-12-17
User Name: 87977
Action: Approved
Comment: Please pass to final review
Version: 0
Date: 2007-11-29
User Name: 109562
Action: Approved
Comment: OK
Version: 0
Date: 2007-11-04
User Name: 109562
Action: Update Started
Comment: Addingl CLI cmd
Version: 0




Product_uuid
9fdbb196-73a6-11d8-9e3a-080020a9ed93|Sun StorageTek 3511 SATA Array
58553d0e-11f4-11d7-9b05-ad24fcfd42fa|Sun StorageTek 3510 FC Array
95288bce-56d3-11d8-9e3a-080020a9ed93|Sun StorageTek 3320 SCSI Array
3db30178-43d7-4d85-8bbe-551c33040f0d|Sun StorageTek 3310 SCSI Array

Attachments

This solution has no attachment