Sun Storage 3510 FC Array
 
Sun Storage 3310 Array
 
Sun Storage 3511 SATA Array
 
Sun Storage 3320 SCSI Array
 

GCS>Sun Microsystems>Storage - Disk>Modular Disk - 3xxx Arrays
 

Applies to:

Goal

Solution

Before installing the SUNWsscs software, be sure to read the release notes for your array.

Install OS updates. To use Sun Storage[TM] Configuration Service on a Solaris host, you need to install the most current Sun recommended OS patches and Java runtime environment software patches for the Solaris[TM] 8, Solaris[TM] 9, and Solaris[TM] 10 OS. For a list of Sun recommended patches, refer to the release notes for your array.

The software installation package, SUNWsscs, includes the following components:

Before installing the software, be sure to read the release notes for your array.

1.  If you are upgrading, be sure you uninstall earlier versions of Sun StorEdge Configuration Service, Sun StorEdge Diagnostic Reporter, and the CLI, including the agents.

2. If the Sun StorEdge 3000 Family Professional Storage Manager CD is not available, download the software using the following steps:

a) Use your Oracle SSO to log in to My Oracle Support at: https://support.oracle.com/
b) Click on the Patches & Updates tab near the top of the window.
c) In the Patch Search pane, click on "Product or Family(Advanced Search)".
d) Check the box for "Include all products in a family".
e) In the Product field, start typing ""Sun StorageTek 3000 Series Software".
f) In the Release field pulldown, select "Sun StorageTek 3000 Series Software 2.5" and/or whatever other
release/s you want to download.
g) Close the release pulldown and click on the Search button.

Step f) will pull up screens similar to those captured below -- you will
see all the patches/releases available for download based on what you selected 

When one of these is selected, the Readme and Download buttons will be visible.
The download file will be zipped and should include the license file along with the binary.

Once selected, it can be downloaded and unzipped.

3.  Unzip the downloaded file.

4.  Unzip the SSCS zip file.

for example:

 # unzip SSCS-2.5.zip

Archive:  SSCS-2.5.zip
   creating: SSCS/
   creating: SSCS/2.5.0.9/
   creating: SSCS/2.5.0.9/windows/
 extracting: SSCS/2.5.0.9/windows/2.5_fw_windows.zip
   creating: SSCS/2.5.0.9/linux/
 extracting: SSCS/2.5.0.9/linux/2.5_fw_linux.zip
   creating: SSCS/2.5.0.9/solaris/
   creating: SSCS/2.5.0.9/solaris/sparc/
  inflating: SSCS/2.5.0.9/solaris/sparc/2.5_fw_solaris_sparc.pkg
   creating: SSCS/2.5.0.9/solaris/i386/
  inflating: SSCS/2.5.0.9/solaris/i386/2.5_fw_solaris_x86.pkg

5.  cd to the sparc or i386 software package directory.

For example for sparc:

# cd SSCS/2.5.0.9/solaris/sparc

6.  Run the 'pkgadd' command, specifying the software package required.

For example:

# pkgadd -d ./2.5_fw_solaris_sparc.pkg

Note: you must be root to run this command.

See the following document for additional assistance:

DocID: 1003542.1 How to setup SSCS monitoring of Sun StorEdge[TM] 3000 family storage arrays

This solution has no attachment