StorageTek[TM] 5000 Series NAS: Configuration for CIFS environments without NetBIOS (NetBT)

Asset ID:	1-71-1004156.1
Update Date:	2009-04-19
Keywords:

Solution Type Technical Instruction Sure

Solution 1004156.1 : StorageTek[TM] 5000 Series NAS: Configuration for CIFS environments without NetBIOS (NetBT)

Related Items


Sun Storage 5210 NAS Appliance
 Sun Storage 5220 NAS Appliance
 Sun Storage 5310 NAS Appliance
 Sun Storage 5320 NAS Gateway/Cluster System
 Sun Storage 5320 NAS Appliance
 Sun Storage 5310 NAS Gateway System

Related Categories


GCS>Sun Microsystems>Storage - Disk>Network Attached Storage

PreviouslyPublishedAs
205769

Description
Windows 2000 and newer versions offer the option to disable NetBIOS over TCP/IP. This significantly changes the way that CIFS clients communicate, and can cause compatibility issues for the NAS. The NAS operating system introduced support for this environment beginning with OS version 4.21M1. Prior versions cannot be used in this environment.

Steps to Follow
StorageTek[TM] 5000 Series NAS: Configuration for CIFS environments without NetBIOS (NetBT)

This setting is enabled or disabled for each client or server. However, in a managed IT infrastructure, all Windows systems will likely use the same setting. It is important to know how this setting is configured in order to configure the NAS. The one instance where it is common

This setting significantly affects how CIFS networking takes place. The standard NetBIOS ports 135-139 are no longer used, instead, communication primarily takes place over port 445, DNS is used instead of WINS, etc..

This document describes how to disable NetBIOS over TCP/IP for Windows systems: Click Here

If the customer that you are working with is not certain whether this setting is in effect, the linked article can be used to make that determination. If this is the case, you should check several systems, including key servers.

If NetBIOS over TCP/IP has in fact been disabled, NAS OS version 4.21M1 or newer is required to operate in this environment.

In order to use this functionality, Active Directory and Dynamic DNS must be enabled and correctly configured, as NetBIOS name resolution will do longer function. Also it is very important to ensure that check above has been done to ensure that the clients and servers on the network truly have NetBIOS disabled. After this configuration change has been made, requests to connect via NetBIOS will be ignored.

To configure the NAS to communicate without NetBIOS using SMB directly over TCP/IP, perform the following steps:

Access the command line administration interface on the NAS via telnet, ssh or a direct console connection.
Enter the following commands at the CLI
- load smbtools
- smbconfig netbios mode=disabled
- set smbrdr.port 445
- savevars

For additional information on configuring the NAS for Active Directory see Sunsolve documents <Document: 1009920.1> and <Document: 1004157.1>

Product
Sun StorageTek 5320 NAS Gateway/Cluster System
Sun StorageTek 5320 NAS Appliance
Sun StorageTek 5310 NAS Gateway/Cluster System
Sun StorageTek 5310 NAS Gateway System
Sun StorageTek 5310 NAS Appliance
Sun StorageTek 5220 NAS Appliance
Sun StorageTek 5210 NAS Appliance

Internal Comments
This document contains normalized content and is managed by the the Domain Lead(s) of the respective domains. To notify content owners of a knowledge gap contained in this document, and/or prior to updating this document, please contact the domain engineers that are managing this document via the “Document Feedback” alias(es) listed below:

[email protected]

The Knowledge Work Queue for this article is KNO-STO-NAS.

normalized, join domain, cifs, NetBIOS, Active Directory, Audited
Previously Published As
89216

Attachments

This solution has no attachment