| Asset ID: |
1-71-1002664.1 |
| Update Date: | 2011-04-13 |
| Keywords: | |
Solution Type
Technical Instruction Sure
Solution
1002664.1
:
Sun StorEdge[TM] 6130 Firmware Matrix
| Related Items |
- Sun Storage 6130 Array
- Sun Storage Common Array Manager (CAM)
|
| Related Categories |
- GCS>Sun Microsystems>Storage - Disk>Modular Disk - 6xxx Arrays
|
PreviouslyPublishedAs
203667
This article documents Sun StorEdge[TM] 6130 Array's components firmware baseline bundled in each corresponding CAM release and patched versions.
In this Document
Goal
Solution
Applies to:
Sun Storage 6130 Array
Sun Storage Common Array Manager (CAM) - Version: 5.0 and later [Release: 5.0 and later]
All Platforms
Goal
This article documents Sun StorEdge[TM] 6130 Array's components firmware baseline bundled in each corresponding CAM release and patched versions.
This document assumes the relevant array product is managed with Common Array Manager. This reference can be used by end-user and all levels of support personnel for purpose of verifying component firmware and management software compatibility.
For instructions to download CAM, please refer to <Document 1296274.1>
How to Download Common Array Manager (CAM) Software and Patches.
Solution
| Baseline / CAM Release |
Sun StorEdge 6130 Firmware |
| Patch |
Controller |
Expansion |
| Firmware |
NVSRAM |
CSM100 FC |
CSM100 SATA |
CSM200 |
FLA200 FC |
FLA300 FC |
FLC200 dSATA |
FLC200 iSATA |
| 1.0 |
117856-10 |
06.10.09.15 |
N2882-610843-012 |
9627 |
no support |
no support |
no support |
| 1.1 |
117856-14 |
06.10.09.16 |
N2882-610843-013 |
9627 |
9718 |
| 1.1 |
119513-01 |
|
9630 |
|
| 1.2 |
117856-15 |
06.12.03.12 |
N2882-612843-003 |
9627 |
9721 |
| 1.2 |
controlled
|
06.12.03.14+
|
N2882-612843-003+ |
9627 |
9722 |
| 1.3 |
117856-17 |
06.12.09.10 |
N2882-612843-003 |
9631 |
9722 |
| 1.3 |
117856-18
118185-14
|
06.12.09.10 |
N2882-612843-006a
|
9631 |
9722 |
| 1.3 |
117856-19
118185-15
|
06.12.10.11
|
N2882-612843-003a
|
9631 |
9722 |
| 2.0 |
117856-26 |
06.12.09.10b
|
N2882-612843-003b
|
9631 |
9722 |
| 2.1 |
117856-27 |
06.12.09.10b
|
N2882-612843-003b
|
9631 |
9722 |
|
Naming convention changed. Version following 2.1 is 5.0. There was no 3.x or 4.x.
|
| 5.0 |
117856-35 |
06.12.27.10 |
N2882-612843-008 |
9631 |
9726 |
| 5.0.1 |
117856-35 |
06.12.27.10 |
N2882-612843-008 |
9631 |
9726 |
| 5.0.2 |
117856-35 |
06.12.27.10 |
N2882-612843-008 |
9631 |
9726 |
| 5.1.0.10 |
117856-37 |
06.19.23.10c |
N2882-619843-001c |
9643 |
9726 |
9884 |
| 5.1.0.11 |
117856-37 |
06.19.25.10d |
N2882-619843-001 |
9643 |
9726 |
9884 |
| 5.1.2.2 |
117856-37 |
06.19.25.10 |
N2882-619843-001 |
9643 |
9726 |
9884 |
| 5.1.3.2 |
117856-37 |
06.19.25.10 |
N2882-619843-001 |
9643 |
9726 |
9884 |
| 5.1.3.2 |
controlled |
06.19.25.13e |
|
| 5.1.3.2 |
controlled |
06.19.25.14e |
|
| 6.0.0.10 |
n/a |
06.19.25.16 |
N2882-619843-001 |
9643 |
9726 |
9887 |
9330 |
9643 |
9565 |
9726 |
| 6.0.1.11 |
n/a |
06.19.25.16 |
N2882-619843-001 |
9643 |
9726 |
9887 |
9330 |
9643 |
9565 |
9726 |
| 6.1.0.16 |
n/a |
06.60.11.10f |
N288X-660843-003 |
9643 |
9726 |
98B4 |
9330 |
9643 |
9565 |
9726 |
| 6.1.1.16 |
n/a |
06.60.11.10 |
N288X-660843-003 |
9643 |
9726 |
98B4 |
9330 |
9643 |
9565 |
9726 |
| 6.1.2.8 |
n/a |
06.60.11.10 |
N288X-660843-003 |
9643 |
9726 |
98B4 |
9330 |
9643 |
9565 |
9726 |
| 6.2.0.13 |
|
06.60.11.10 |
N288X-660843-003 |
9681 |
9728 |
98C1 |
9330 |
9681 |
9566 |
9728 |
|
6.3.0
|
|
(CAM 6.3 was never released.)
|
|
6.4.0.10
|
|
06.60.11.10 |
N288X-660843-003 |
9681 |
9728 |
98C4 |
9330 |
9681 |
9566 |
9728 |
|
6.4.1.5
|
|
06.60.22.10 |
N288X-660843-003 |
9682 |
9728 |
98C4 |
9330 |
9682 |
9566 |
9728 |
|
6.5.0.10
|
|
06.60.22.10 |
N288X-660843-003 |
9682 |
9728 |
98C4 |
9330 |
9682 |
9566 |
9728 |
|
6.5.0.x
|
controlled |
|
N288X-660843-039g |
|
|
6.6.0.11h
|
|
06.60.22.10 |
N288X-660843-003 |
9682 |
9728 |
98D0 |
9330 |
9682 |
9566 |
9728 |
|
6.7.0.12
|
|
06.60.22.10 |
N288X-660843-003 |
9682 |
9728 |
98D0 |
9330 |
9682 |
9566 |
9728 |
|
6.7.0.13 (Windows Only)
|
144861-01
|
(CAM core patch for Windows only. Fixes CR6968739 J4410 reporting incorrect chassis serial number; and CR6972298 Win2008 undefined constant.)
|
| Baseline / CAM Release |
Patch |
Firmware |
NVSRAM |
CSM100 FC |
CSM100 SATA |
CSM200 |
FLA200 FC |
FLA300 FC |
FLC200 dSATA |
FLC200 iSATA |
| Controller |
Expansion |
| Sun StorEdge 6130 Firmware |
|
NOTE: Firmware shown as "controlled" are not publicly available and is only
provided on a case-by-case basis as deemed necessary by support services.
+ Enables Remote Volume Mirror (RVM) feature.
For approved config only. Requires 118164-04 and 118165-04.
a 117856-18 was needed for Sun StorEdge 5000
NAS Gateway Support, 117856-19 does not support it. However, mixing
06.12.10.11 (117856-19) and N2882-612843-006 (117856-18) is not supported
bec. it was not tested for Sun Alert 102191.
b Baseline 2.0 and 2.1 incorrectly bundled the
older 6130 firmware 06.12.09.10 and NVSRAM N2882-612843-003.
If a 6130 array already has the newer 06.12.10.11 firmware or the newer
NVSRAM N2882-612843-006, simply choose "Do Not Upgrade" when registering
the array.
c Some interim build before 06.19.23.10 may have
been released to some customers as temporary fix, these should be updated
to 5.1 baseline or later ASAP.
d Sun StorEdge 5000 NAS Gateway bug fix.
e 06.19.25.13/23 and 06.19.25.14/.24 were early access
releases of .16/26. Customers with this firmware should be updated to .16/26.
Note that .14 contains all fixes in .13 and supersedes it.
f SE6130 (288X controller) does not support
7.10 firmware; 6.60 is the last release for this controller.
g Temporary fix in NVSRAM for CR6704575 PFA issue.
h CAM 6.6.0.11 host types do not match array's
host region (CR6935284), affecting 2500, 6140, 6180, 6540, 6580/6780.
This may result in either new mappings selecting the wrong host region,
or user confused by the display and change existing mappings which was
correct, to become wrong. CAM 6.6.0.12 through patch 14147[456]-01 was
specifically released to resolve this bug.
|
Internal website for CAM supported array firmware matrix.
http://tsc-storage.us/products/CAM/matrix.html
This site is typically updated first before being edited for public consumption.
Attachments
This solution has no attachment
