problems with ftp to Sun StorEdge[TM] T3/6120 after fw upgrade

Asset ID:	1-71-1002199.1
Update Date:	2010-07-19
Keywords:

Solution Type Technical Instruction Sure

Solution 1002199.1 : problems with ftp to Sun StorEdge[TM] T3/6120 after fw upgrade

Related Items


Sun Storage T3+ Array
 Sun Storage T3 Array
 Sun Storage 6120 Array

Related Categories


GCS>Sun Microsystems>Storage - Disk>Modular Disk - 6xxx Arrays

PreviouslyPublishedAs
203111

Description
After upgrading the firmware using the t3.sh/6120.sh script, ftp to the array is not in interactive mode or fails with a "Macro definition missing null line terminator" error.

Steps to Follow
When ftping to the array it looks like it is still attempting to run the upgrade script and user cannot login.

  # ftp 10.0.0.36
Connected to 10.0.0.36.
220 10.0.0.36 T300 FTP server ready.
Name (10.0.0.36:root):
331 Password required for root.
Password:
230 User root logged in.
bin
200 Type set to I.
prompt
Interactive mode off.
cd /
250 CWD command successful.
lcd /tmp/upload.27957
/tmp/upload.27957: No such file or directory
mkdir etc
550 etc: file exists.
mkdir web
550 web: file exists.
mkdir web/snmp
550 web/snmp: file exists.
mput ep*.bin
mput v118*.bin
mput lpc*.*
cd etc
250 CWD command successful.
lcd files/etc
files/etc: No such file or directory
rename schd.conf sch_old.conf
350 File exists, ready for destination name
550 rename: file exists.
put schd.conf
schd.conf: No such file or directory
cd ../web
250 CWD command successful.
lcd ../web
../web: No such file or directory
mput *
cd snmp
250 CWD command successful.
lcd snmp
snmp: No such file or directory
mput *
quit
221 Goodbye.
You may also receive the following error when attempting to ftp to your array:
Connected to t3b0.
220 192.168.0.40 pSOSystem FTP server (@(#)(#)pVER IA/MIPS, Version
3.1.0, Built on 12/03/1999) ready.
Macro definition missing null line terminator.
221 Goodbye.
ftp>
It is possible that the script did not correctly clean up the .netrc file used to upgrade the firmware.  Check for the file in /.netrc or ~/.netrc and remove it.
Login as the same user used to run the script
# cd
# ls -a .net*
If this returns "No match" then the file does not exist.  If this returns ".netrc", remove the file
# rm .netrc

Product
Sun StorageTek T3+/6X20 Controller Firmware 3.1
Sun StorageTek T3+ Array Controller FW 2.1
Sun StorageTek T3+ Array
Sun StorageTek T3 Multi-Platform 1.1
Sun StorageTek T3 Array
Sun StorageTek 6120 Array

T3, t3.sh, firmware, fw, upgrade, ftp, interactive, login, Macro, definition
Previously Published As
81841

Change History
Date: 2005-10-11
User Name: 7058
Action: Approved
Comment: Enabled STM for clarity.
Updated review date.
OK to republish.
Version: 8
Date: 2005-10-11
User Name: 7058
Action: Accept
Comment:
Version: 0
Date: 2005-10-11
User Name: 37842
Action: Approved
Comment: looks good.
Version: 0
Product_uuid
62772b5a-05c6-11d8-84cb-080020a9ed93|Sun StorageTek T3+/6X20 Controller Firmware 3.1
231f0a60-146b-11d7-8cdc-f4071bf80989|Sun StorageTek T3+ Array Controller FW 2.1
2a714b10-0a18-11d6-86e2-d56b387d4fbf|Sun StorageTek T3+ Array
bd277b78-24f2-11d7-98bd-a9b094d535c2|Sun StorageTek T3 Multi-Platform 1.1
2a6d7d50-0a18-11d6-8e0b-f0bd33b24928|Sun StorageTek T3 Array
2cd2e7d2-2980-11d7-9c3f-c506fe37b7ef|Sun StorageTek 6120 Array

Attachments

This solution has no attachment