Sun Fire T2000 Server
 
Sun Fire T1000 Server
 

GCS>Sun Microsystems>Servers>CMT Servers
 

So when the add_install_client command is run the administrator must specify the correct architecture type 'sun4v' and NOT 'sun4u' as was needed for previous UltraSPARC systems. If sun4u is specified when adding the client you will see a failure similar to this example (during boot -v)=>
:
Rebooting with command: boot net -v
Boot device: /pci@7c0/pci@0/network@4  File and args: -v
100 Mbps FDX Link up
Requesting Internet Address for 0:14:4f:2:3b:22
Requesting Internet Address for 0:14:4f:2:3b:22
100 Mbps FDX Link up
Using RARP/BOOTPARAMS...
Internet address is: 10.8.55.76
hostname: pts-bur-t1000-a
domainname: Ecd.East.Sun.COM
Found 10.8.55.15 @ 8:0:20:c4:75:3f
root server: bloodshot (10.8.55.15)
root directory: /cdrom/sol_10_106_sparc/s0/Solaris_10/Tools/Boot
Size: 0x76e40+0x1c872+0x3123a Bytes
module /platform/SUNW,Sun-Fire-T1000/kernel/sparcv9/unix: text at [0x1000000, 0x1076e3f] data at 0x1800000
module misc/sparcv9/krtld: text at [0x1076e40, 0x108f737] data at 0x184dab0
module /platform/SUNW,Sun-Fire-T1000/kernel/sparcv9/genunix: text at [0x108f738, 0x11dd437] data at 0x1853240
module /platform/SUNW,Sun-Fire-T1000/kernel/misc/sparcv9/platmod: text at [0x11dd438, 0x11dd43f] data at 0x18a4c90
module /platform/SUNW,Sun-Fire-T1000/kernel/cpu/sparcv9/SUNW,UltraSPARC-T1: text at [0x11dd440, 0x11e06ff] data at 0x18a53c0
SunOS Release 5.10 Version Generic_118822-23 64-bit
Copyright 1983-2005 Sun[TM] Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
Ethernet address = 0:14:4f:2:3b:22
Using default device instance data
mem = 8380416K (0x1ff800000)
avail mem = 8377360384
root nexus = Sun Fire(TM) T1000
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
pseudo-device: dld0
dld0 is /pseudo/dld@0
px1 at root: 0x7c0 0x0
px1 is /pci@7c0
PCI Express-device: pci@0, px_pci0
px_pci0 is /pci@7c0/pci@0
Requesting Internet address for 0:14:4f:2:3b:22
Found my IP address: a08374c (10.8.55.76)
hostname: pts-bur-t1000-a
domainname: Ecd.East.Sun.COM
root on bloodshot:/cdrom/sol_10_106_sparc/s0/Solaris_10/Tools/Boot fstype nfsdyn
cpu0: UltraSPARC-T1 (cpuid 0 clock 1000 MHz)
cpu1: UltraSPARC-T1 (cpuid 1 clock 1000 MHz)
cpu2: UltraSPARC-T1 (cpuid 2 clock 1000 MHz)
cpu3: UltraSPARC-T1 (cpuid 3 clock 1000 MHz)
cpu4: UltraSPARC-T1 (cpuid 4 clock 1000 MHz)
cpu5: UltraSPARC-T1 (cpuid 5 clock 1000 MHz)
cpu6: UltraSPARC-T1 (cpuid 6 clock 1000 MHz)
cpu7: UltraSPARC-T1 (cpuid 7 clock 1000 MHz)
cpu8: UltraSPARC-T1 (cpuid 8 clock 1000 MHz)
cpu9: UltraSPARC-T1 (cpuid 9 clock 1000 MHz)
cpu10: UltraSPARC-T1 (cpuid 10 clock 1000 MHz)
cpu11: UltraSPARC-T1 (cpuid 11 clock 1000 MHz)
cpu12: UltraSPARC-T1 (cpuid 12 clock 1000 MHz)
cpu13: UltraSPARC-T1 (cpuid 13 clock 1000 MHz)
cpu14: UltraSPARC-T1 (cpuid 14 clock 1000 MHz)
cpu15: UltraSPARC-T1 (cpuid 15 clock 1000 MHz)
cpu16: UltraS
panic[cpu8]/thread=2a1073a1cc0: BAD TRAP: type=10 rp=2a1073a1290 addr=7bfac314 mmu_fsr=0
: illegal instruction fault:
addr=0x7bfac314
pid=0, pc=0x7bfac314, sp=0x2a1073a0b31, tstate=0x99e2001601, context=0x0
g1-g7: 5a827999, 7004f000, 10325476, 10325400, 1, 10, 2a1073a1cc0
:
:
So, the correct command to add the install client for the Jumpstart should use ,sun4v' for architecture type and should look something like this:
# ./add_install_client t1_server_name sun4v

This solution has no attachment