Asset ID:	1-72-1012431.1
Update Date:	2009-09-17
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  1012431.1 :   After applying patch 117165-01, the warning messages still occur in Sun Blade[TM] 100 and Sun Blade[TM] 150 workstation.  


PreviouslyPublishedAs
217133

Symptoms
This is related to Bug# 5012902. The bug is fixed by the patch 117165-01.

Note that, after applying patch 117165-01, the warning messages may still occur in the /var/adm/messages file.

Resolution
After applying patch 117165-01, bring the system down to the ok prompt.

Set auto-boot? to false

At that point issue a "reset-all" or power cycle the box.

Then issue a "boot -r"

Normally, the "boot -r" should do the job. But in some cases, there are customers
who may still see the message after "boot -r" --- this symptom is intermittent.
Adding the extra step of "reset-all" or power-cycling guarantees the device
tree is re-built.

Product
Sun Blade 150 Workstation
Sun Blade 100 Workstation

Internal Comments
Bug ID # 5012902
Patch 117165-01
Escalation Id: 1-4444076
Case Id: 10600457

sb100, recurring error message
Previously Published As
79159

Change History
Date: 2004-12-01
User Name: 71396
Action: Approved
Comment: Reviewed document, updated trademarking after expanding product names in title. Publishing document.
Version: 6
Date: 2004-12-01
User Name: 71396
Action: Accept
Comment:
Version: 0
Date: 2004-12-01
User Name: 72852
Action: Approved
Comment: Looks good to me. I did fix one spelling error but other than that, it looks fine from a technical standpoint.
Version: 0
Date: 2004-11-30
User Name: 72852
Action: Accept
Comment:
Version: 0
Date: 2004-11-30
User Name: 77342
Action: Approved
Comment: Please check the content to see if it is OK. The intended audience is the CU.
Version: 0
Date: 2004-11-30
User Name: 77342
Action: Update Started
Comment: change the audience
Version: 0
Date: 2004-11-13
User Name: 31620
Action: Approved
Comment: Slight changes to some of the tenses of the English used,
checked review date,
added some key words,
publishing
Version: 3
Date: 2004-11-12
User Name: 31620
Action: Accept
Comment:
Version: 0
Date: 2004-11-12
User Name: 105223
Action: Approved
Comment: reworked the resolution section otherwise all is fine
Version: 0
Date: 2004-11-12
User Name: 105223
Action: Add Comment
Comment: Let's change the resolution section to read:

Resolution:

After applying patch 117165-01, bring the system down to the ok prompt.
Set auto-boot? to false
At that point issue a "reset-all" or power cycle the box.
Then issue a "boot -r"

Normally, the "boot -r" should do the job. But in this case, there are customer
who still sees the messages after "boot -r" --- this symptom is intermittent.
Thus, adding an extra step of "reset-all" or power-cycle guarantees the device
tree is re-built.
Version: 0
Date: 2004-11-12
User Name: 105223
Action: Accept
Comment:
Version: 0
Date: 2004-11-12
User Name: 77342
Action: Approved
Comment: Please check with the bug and patch number to make sure they matches.

If any question about the symptom, give me a call at x13432.
Version: 0
Date: 2004-11-12
User Name: 77342
Action: Created
Comment:
Version: 0
Product_uuid
528e68a2-65c2-404c-9499-58d4834cd4d0|Sun Blade 150 Workstation
2a071da8-0a18-11d6-906c-a8efc43ec293|Sun Blade 100 Workstation

Attachments

This solution has no attachment