Asset ID:	1-72-1007996.1
Update Date:	2011-03-31
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  1007996.1 :   picld error after upgrading PCI IB_SCC IO Assembly to PCI+ IO Assembly  


PreviouslyPublishedAs
211030

Applies to:

Sun Fire E2900 Server
Sun Fire V1280 Server
Sun Netra 1290 Server - Version: Not Applicable and later    [Release: N/A and later]
Sun Netra 1280 Server - Version: Not Applicable and later    [Release: N/A and later]
All Platforms

Symptoms

During OS bootup the following error is seen on the console :

May 19 17:19:42 v4u-v1280d picld[56]: disk_leds_thread exiting; cannot find disk
controller for ../../devices/ssm@0,0/pci@18,600000/scsi@2:scsi

Changes

Upgrading PCI IB_SCC IO Assembly to PCI+ IO Assembly
Solaris[TM] 9 Update 8 / Solaris[TM} 9 9/05

Cause

The above error is attributed to a bug in the "picld".

Solution

Additional Information

The above error is seen only in Solaris[TM] 9 Update 8 / Solaris[TM} 9 9/05.
This error DOES NOT effect the availability of the system and the system functions as normal. However, only the control of LEDs of the internal disks is affected.

This issue is not seen in Solaris[TM] 8 or Solaris[TM] 10 releases required to support the PCI+ IB_SSC assembly

The error message is seen in S9 with KJP Patch ID 118558-14 and above, but the underlying bug exists even prior to the Patch ID 118558-14, except that the warning message did not get printed on console. 

Resolution

This issue is fixed in S9 KJP 118558-29 or higher.

Internal Comments
For internal Sun use only.

The bug for this issue is Bug ID 6427498 .

picld, device, paths, LED, PCI+, xmits, IB_SSC, PCI, Normalized
Previously Published As
85832


Attachments

This solution has no attachment