Asset ID:	1-72-1004578.1
Update Date:	2009-03-01
Keywords:

---

Solution Type  Problem Resolution Sure

Solution  1004578.1 :   Netra[TM]: LOM command "show" displays incorrect hostname  


PreviouslyPublishedAs
206349

Symptoms
Some Netra[TM] servers (Netra[TM] 20, Netra[TM] T1 AC200) display the wrong hostname when executing the "show" command from the lom> prompt.

Example:

lom>show hostname
hostname cy78 <- The hostname at the LOM level does not match with the uname -a command from Solaris[TM]

From the Solaris prompt:

# uname -a
SunOS netra20-hardware 5.8 Generic_108528-13 sun4u sparc SUNW,Netra-T4

This behavior occurs on the Netra 20 and Netra T1 AC200. It may or may not apply to the Netra[TM] T1 Model 100 and 105 servers.

Resolution
This problem is usually caused by missing LOM (Learning Object Metadata) supplemental patches/packages. You can still issue LOM commands from the lom> prompt even when the patches or packages are missing. However, 'show hostname' will display gibberish or the prior hostname of the host.

To fix, check for the existence of the following Solaris packages:

Install any missing packages. You can find these packages on the supplemental CD.

Also, be sure to install any applicable LOM patches.

LOM will now report the hostname correctly.

Keywords: LOM, hostname

Product
Netra T1 AC200 Server
Netra t1 model 105 Server
Netra 20 Server
Netra t1 model 100 Server

Internal Comments
[email protected]



LOM, hostname
Previously Published As
43495

Change History
Date: 2003-05-20
User Name: Administrator
Action: Migration from KMSCreator
Comment: updated by : Michele Whittaker
comment : Removed some template stuff from internal section.
date : Jul 10, 2002
updated by : Michele Whittaker
comment : Removed some template stuff from internal section.
date : Jul 10, 2002
updated by : Michele Whittaker
comment : Minor grammatical corrections; added
trademarks and keywords
date : Jul 9, 2002

Attachments

This solution has no attachment